Environment Protection (Environmental Standards for Noise) Regulations 1997
颁布于 1997-02-13 · 文本截至 2026-10-01
以研究形式发布的公开法律与官方指引,不构成法律、税务或金融建议。
研究内容本身以英文撰写。标题和标签已翻译,调查结果和引文未翻译。
关于这部法律
- 语言
- English
- 类型
- 条例
- 组织
- European Union
- 国家
- 毛里求斯
- 主题
- Air and atmosphere
- 关键词
- noise pollution, pollution control
在哪里阅读
该法律没有记录来源链接。
文本
所收录的法律原文,按条款排列。每个条款都有自己的链接。
Environmental Standards for Noise Regulations THE ENVIRONMENT PROTECTION ACT 1991 Regulations made by the Minister under sections 36 and 74 of the Environment Protection Act 1991 1. These regulations may be cited as the Environment Protection (Environmental Standards for Noise) Regulations 1997. 2. In these regulations "dB(A) Leq" means the equivalent A-weighted sound pressure level measured in decibel; “factory” has the same meaning as in section 71 of the Occupational Safety, Health and Welfare Act 1988; “industrial noise” means noise generated by a factory; “neighbourhood noise” means any noise other than (a) industrial noise; or (b) noise made by an aircraft, an animal or traffic. 3.The environmental noise standards shall be the standards specified in the Schedule. 4. Regulation 3 shall not, for a period of 2 years as from the commencement of these regulations, apply to industrial noise if the activity generating such noise has already started at the commencement of these regulations. 5. (1) Noise measurements shall, as far as practicable, be effected one metre from the nearest opening of any residential building facing the noise source and at 1.5 metres above the ground or floor level. (2) The measurement methods and equipment used shall be those approved by the enforcing agency. 6.These regulations shall come into operation on 1 March, 1997. Made by the Minister on 13 February, 1997. SCHEDULE (regulation 3) NOISE EXPOSURE LIMITS Industrial Noise 07.00 --- 21.00 hrs ... 60*dB(A) Leq 21.00 --- 07.00 hrs ... 55*dB(A) Leq Neighbourhood Noise 07.00 --- 18.00 hrs ... 60 dB(A) Leq 18.00 --- 21.00 hrs ... 55 dB(A) Leq 21.00 --- 07.00 hrs ... 50 dB(A) Leq Apply a tonal character adjustment of +5 dB(A) to the measured value where the noise has a definite continuous note such as a whine or hiss