Plastic Materials and Articles in Contact with Food (Amendment) Regulations (Northern Ireland) 2003 (S.R. No. 316 of 2003)

Plastic Materials and Articles in Contact with Food (Amendment) Regulations (Northern Ireland) 2003 file:///D/HTML/uk39571.htm[16.01.2025 11:43:44] Statutory Rule 2003 No. 2 Plastic Materials and Articles in Contact with Food (Amendment) Regulations (Northern Ireland) 2003 © Crown Copyright 2003 Statutory Rules of Northern Ireland printed from this website are printed under the superintendence and authority of the Controller of HMSO being the Government Printer for Northern Ireland. The legislation contained on this web site is subject to Crown Copyright protection. It may be reproduced free of charge provided that it is reproduced accurately and that the source and copyright status of the material is made evident to users. It should be noted that the right to reproduce the text of Statutory Rules of Northern Ireland does not extend to the Government Printer for Northern Ireland imprints which should be removed from any copies of the Statutory Rule which are issued or made available to the public. This includes reproduction of the Statutory Rule on the Internet and on intranet sites. The Royal Arms may be reproduced only where they are an integral part of the original document. The text of this Internet version of the Statutory Rule which is published by the Government Printer for Northern Ireland has been prepared to reflect the text as it was Made. A print version is also available and is published by The Stationery Office Limited as the Plastic Materials and Articles in Contact with Food (Amendment) Regulations (Northern Ireland) 2003, ISBN 0 33794535 7. The print version may be purchased by clicking here. Braille copies of this Statutory Rule can also be purchased at the same price as the print edition by contacting TSO Customer Services on 0870 600 5522 or e mail:customer.services@tso.co.uk. Further information about the publication of legislation on this website can be found by referring to the Frequently Asked Questions. To ensure fast access over slow connections, large documents have been segmented into "chunks". Where you see a "continue" button at the bottom of the page of text, this indicates that there is another chunk of text available. STATUTORY RULES OF NORTHERN IRELAND 2003 No. 2 FOOD Plastic Materials and Articles in Contact with Food (Amendment) Regulations (Northern Ireland) 2003 Made 3rd January 2003 Coming into operation 28th February 2003 file:///bookstore.htm?AF=A10075&FO=38383&Action=AddItem&ProductID=0337945357 mailto:customer.services@tso.co.uk http://www.hmso.gov.uk/faqs.htm Plastic Materials and Articles in Contact with Food (Amendment) Regulations (Northern Ireland) 2003 file:///D/HTML/uk39571.htm[16.01.2025 11:43:44] The Department of Health, Social Services and Public Safety[1], in exercise of the powers conferred on it by Articles 15(2), 16(1), 25(1)(a) and (3), 32 and 47(2) of the Food Safety (Northern Ireland) Order 1991[2], having had regard, in accordance with Article 47(3A) of the said Order, to relevant advice given by the Food Standards Agency, and after consultation as required by Article 9 of Regulation (EC) No. 178/2002 of the European Parliament and of the Council laying down the general principles and requirements of food law, establishing the European Food Safety Authority and laying down procedures in matters of food safety[3], and in accordance with Article 47(3) and (3B) of the said Order, hereby makes the following Regulations: Citation and commencement 1. These Regulations may be cited as the Plastic Materials and Articles in Contact with Food (Amendment) Regulations (Northern Ireland) 2003 and shall come into operation on 28th February 2003. Amendments to the Plastic Materials and Articles in Contact with Food Regulations (Northern Ireland) 1998 2. The Plastic Materials and Articles in Contact with Food Regulations (Northern Ireland) 1998[4] ("the principal Regulations") shall be amended in accordance with regulations 3 to 6. 3. In regulation 10 (offences), immediately after paragraph (18) there shall be added the following paragraphs " (19) In any proceedings for an offence under these Regulations, it shall be a defence to prove that (a) the act constituting the offence was committed in relation to a plastic material or article which was manufactured or imported into the European Community before 1st March 2004 and the matter constituting the offence would not have constituted an offence under these Regulations if the amendments made to them by the provisions specified in paragraph (20) had not been in force at the time that matter occurred; or (b) the act constituting the offence was committed in relation to a plastic material or article which was manufactured or imported into the European Community before 1st March 2003, and the matter constituting the offence would not have constituted an offence under these Regulations if the amendments made to them by regulation 4(a)(i) and (b) (in so far as they relate to the monomer divinylbenzene) and 6 of the Plastic Materials and Articles in Contact with Food (Amendment) Regulations (Northern Ireland) 2003 had not been in force at the time that matter occurred. (20) The provisions referred to in paragraph (19)(a) are the provisions of the Plastic Materials and Articles in Contact with Food (Amendment) Regulations (Northern Ireland) 2003, except in so far as they relate to the monomer divinylbenzene.". 4. In Schedule 1 (monomers authorised without time limit, monomers authorised up to the end of 2001, monomers authorised up to the end of 1998 and supplementary) (a) in Section A of Part I (i) in the case of each monomer listed in Part I of Schedule 1 to these Regulations, the item number, PM/REF No, CAS No, name and restriction or Plastic Materials and Articles in Contact with Food (Amendment) Regulations (Northern Ireland) 2003 file:///D/HTML/uk39571.htm[16.01.2025 11:43:44] specification specified for that monomer in that Part shall be inserted in the appropriate numerical position for that item number, (ii) in the case of each monomer named in the second column of Part II of Schedule 1 to these Regulations, for the item number for that monomer specified opposite to it in the column headed "Item" there shall be substituted the item number for it specified in the first column (item) of that Part, (iii) in the case of the monomer Bis (4-isocyanatocyclohexyl) methane (item 43), for the entry for that monomer specified in column 1 (PM/REF/No) there shall be substituted the entry "13560", and (iv) in the case of each monomer named in the first column of Part III of Schedule 1 to these Regulations, for the entry for that monomer specified opposite to it in column 4 (restrictions and specifications) there shall be substituted the entry for it specified in the second column (restrictions and specifications) of that Part; (b) in Section B of Part I, all the entries for the monomers named in Part IV of Schedule 1 to these Regulations shall be deleted; and (c) in Part II, at the end of paragraph 4 there shall be inserted the following provisions " (22) SML(T) in this case means that the restriction shall not be exceeded by the sum of the migration levels of the substances having PM/REF/Nos. 13620, 36840, 40320 and 87040. (23) SML(T) in this case means that the restriction shall not be exceeded by the sum of the migration levels of the substances having PM/REF/Nos. 13720 and 40580. (24) SML(T) in this case means that the restriction shall not be exceeded by the sum of the migration levels of the substances having PM/REF/Nos. 16650 and 51570. (25) QM(T) in this case means that the restriction shall not be exceeded by the sum of the residual quantities of the substances having PM/REF/Nos. 14950, 15700, 16240, 16570, 16600, 16630, 18640, 19110, 22332, 22420, 22570, 25210, 25240 and 25270.". 5. In Schedule 2 (additives and supplementary) (a) in Part I (i) in the case of each additive listed in Part I of Schedule 2 to these Regulations, the item number, PM/REF No, CAS No, name and restriction or specification specified for that additive in that Part shall be inserted in the appropriate numerical position for that item number, (ii) in the case of the additive Bis (polyethyleneglycol) hydroxymethylphosphonate, there shall be inserted in column 2 (CAS No) the entry "68951-50-8", and (iii) in the case of the additive named in the first column of Part II of Schedule 2 to these Regulations, for the entry for that additive specified opposite to it in Plastic Materials and Articles in Contact with Food (Amendment) Regulations (Northern Ireland) 2003 file:///D/HTML/uk39571.htm[16.01.2025 11:43:44] column 4 (restrictions and specifications) there shall be substituted the entry for it specified in the second column (restrictions and specifications) of that Part; and (b) in Part II (i) in the case of each additive listed in Part III of Schedule 2 to these Regulations, the item number, PM/REF/No, CAS No, name and restriction or specification specified for that additive in that Part shall be inserted in the appropriate numerical position for that item number, and (ii) in the case of each additive named in the first column of Part IV of Schedule 2 to these Regulations, for the entry for that additive specified opposite to it in column 4 (restrictions and specifications) there shall be substituted the entry for it specified in the second column (restrictions and specifications) of that Part; and (c) in Part III (i) in note (11) of paragraph 4, after "36800" there shall be inserted ", 36840", and (ii) at the end of that paragraph there shall be added the following provisions " (22) SML(T) in this case means that the restriction shall not be exceeded by the sum of the migration levels of the substances having PM/REF/Nos. 13620, 36840, 40320 and 87040. (23) SML(T) in this case means that the restriction shall not be exceeded by the sum of the migration levels of the substances having PM/REF/Nos. 13720 and 40580. (24) SML(T) in this case means that the restriction shall not be exceeded by the sum of the migration levels of the substances having PM/REF/Nos. 16650 and 51570.". 6. In Schedule 2B (specifications) in the case of the substance specified in Schedule 3 to these Regulations, the item number, PM/REF No and specification set out for that substance in that Schedule shall be inserted in the appropriate numerical position for that item number and letter. Sealed with the Official Seal of the Department of Health, Social Services and Public Safety on 3rd January 2003. L.S. Don Hill Plastic Materials and Articles in Contact with Food (Amendment) Regulations (Northern Ireland) 2003 file:///D/HTML/uk39571.htm[16.01.2025 11:43:44] A Senior Officer of the Department of Health, Social Services and Public Safety SCHEDULE 1 Regulation 4(a)(i), (ii) and (iv) and (b) PART I list of monomers to be added to section a of part i of schedule i to the principal regulations Item PM/REF No. CAS No. Name Restrictions and specifications 33B 13075 00091 76-9 Benzoguanamine see "2,4-Diamino-6-Phenyl-1,3,5 Triazine" 47B 13620 10043 35-3 Boric acid SML(T) = 6 mg/kg (22) (expressed as boron) without prejudice to the provisions of Directive 98/83/EC on water for human consumption[5]. 49A 13720 00110 63-4 1,4-Butanediol SML(T) = 0.05 mg/kg (23) 76A 15310 00091 76-9 2,4-Diamino-6 phenyl-1,3,5-triazine QMA = 5 mg/6 dm2 92A 16650 00127 63-9 Diphenyl sulphone SML(T) = 3 mg/kg (24) 93A 16690 01321 74-0 Divinylbenzene QMA = 0.01 mg/6 dm2 of SML = ND (DL = 0.02 mg/kg, analytical tolerance included) for the sum of divinylbenzene and ethylvinylbenzene and in compliance with the specifications laid down in Schedule 2B. 93C 16697 00693 23-2 n-Dodecanedioic Acid 120A 18897 16712 64-4 6-Hydroxy-2 naphthalenecarboxylic acid SML = 0.05 mg/kg 120B 18898 103 90-2 N-(4-Hydroxyphenyl) acetamide Only to be used in liquid crystals and behind a barrier layer in multi-layered plastics. 147B 22332 28679 16-5 Mixture of (40% w/w) 2,2,4 trimethylhexane-1,6 diisocyanate and (60% w/w) 2,4,4 trimethylhexane-1,6 diisocyanate QM(T) = 1 mg/kg (expressed as NCO) (25) 217A 25840 03290- 1,1,1-trimethyl- SML = 0.05 mg/kg Plastic Materials and Articles in Contact with Food (Amendment) Regulations (Northern Ireland) 2003 file:///D/HTML/uk39571.htm[16.01.2025 11:43:44] 92-4 olpropane trimethacrylate PART II list of monomers for which the entry contained in the first column (item) of section a of part i of schedule 1 to the principal regulations is to be amended Item Name 49B 1.4-Butanediol bis(2.3-epoxypropyl)ether 49C 1,4-Butanediol formal 76B 1,6-Diamino-2,2,4-trimethylhexane 76C 1,6-Diamino-2,4,4-trimethylhexane 93B N,N'-Divinyl-2-imidazolidone 93D 1-Dodecene 217B Trioxane PART III list of monomers for which the entry contained in column 4 (restrictions) of section a of part i of schedule 1 to the principal regulations is to be amended Name Restrictions and specifications Chlorotrifluoroethylene QMA = 0.5 mg/6 dm2 Cyclohexyl isocyanate QM(T ) = 1 mg/kg (expressed as NCO) (25) Dicyclohexylmethane-4,4'-diisocyanate QM(T ) = 1 mg/kg (expressed as NCO) (25) 3,3'-Dimethyl-4,4'-diisocyanatobiphenyl QM(T ) = 1 mg/kg (expressed as NCO) (25) Diphenylether-4,4'-diisocyanate QM(T ) = 1 mg/kg (expressed as NCO) (25) Diphenylmethane-2,4'-diisocyanate QM(T ) = 1 mg/kg (expressed as NCO) (25) Diphenylmethane-4,4'-diisocyanate QM(T ) = 1 mg/kg (expressed as NCO) (25) Hexamethylene dissocyanate QM(T ) = 1 mg/kg (expressed as NCO) (25) 1-isocyanato-3-isocyanatomethyl-3,5,5 trimethylcyclohexane QM(T ) = 1 mg/kg (expressed as NCO) (25) Plastic Materials and Articles in Contact with Food (Amendment) Regulations (Northern Ireland) 2003 file:///D/HTML/uk39571.htm[16.01.2025 11:43:44] 1,5-Naphthalene diisocyanate QM(T ) = 1 mg/kg (expressed as NCO) (25) Octadecyl isocyanate QM(T ) = 1 mg/kg (expressed as NCO) (25) 2,4-Toluene diisocyanate QM(T ) = 1 mg/kg (expressed as NCO) (25) 2,6-Toluene diisocyanate QM(T ) = 1 mg/kg (expressed as NCO) (25) 2,4-Toluene diisocyanate dimer QM(T ) = 1 mg/kg (expressed as NCO) (25) PART IV list of monomers for which all the entries contained in section b of part i of schedule 1 to the principal regulations are to be deleted Benzoguanamine 1,4-Butanediol 2,4-Diamino-6-phenyl-1,3,5-triazine Divinylbenzene n-Dodecanedioic acid 1,1,1-Trimethylolpropane trimethacrylate SCHEDULE 2 Regulation 5(a)(i) and (iii) and (b) PART I list of additives to be added to part i of schedule 2 to the principal regulations Item PM/REF No. CAS No. Name Restrictions and specifications 27b 36840 12007 55-5 Barium tetraborate SML(T) = 1 mg/kg expressed as barium (11) and SML(T) = 6 mg/kg (22) (expressed as boron) without prejudice to the provisions of Directive 98/83/EC on water for human consumption. 38C 40320 10043 35-3 Boric acid sml(t) = 6 mg/kg (22) (expressed as boron) without prejudice to the provisions of Directive 98/83/EC on water for human consumption. Plastic Materials and Articles in Contact with Food (Amendment) Regulations (Northern Ireland) 2003 file:///D/HTML/uk39571.htm[16.01.2025 11:43:44] 40A 40580 00110 63-4 1,4-Butanediol SML(T) = 0.05 mg/kg (23) 188B 71670 178671 58-4 Pentaerythritol tetrakis (2 cyano-3,3 diphenylacrylate) SML(T) = 0.05 mg/kg 246A 87040 01330 43-4 Sodium tetraborate SML(T) = 6 mg/kg (22) (expressed as boron) without prejudice to the provisions of Directive 98/83/EC on water for human consumption. PART II additive for which the entry contained in column 4 (restrictions and specifications) of part i of schedule 2 to the principal regulations is to be amended Name Restrictions and specifications Bis(polyethyleneglycol) hydroxymethylphosphonate SML = 0.6 mg/kg PART III list of additives to be added to part ii of schedule 2 to the principal regulations Item PM/REF No. CAS No. Name Restrictions and specifications 27A 45650 6197 30-4 2-Cyano-3,3- diphenylacrylic acid, 2 ethylhexyl ester SML = 0.05 mg/kg 82A 68860 04724 48-5 n-Octylphosphonic acid SML = 0.05 mg/kg 111A 95000 28931 67-1 Trimethylolpropane trimethacrylate methyl methacrylate copolymer PART IV list of additives for which the entry contained in column 4 (restrictions and specifications) of part ii of schedule 2 to the principal regulations is to be amended Name Restrictions and specifications n,n-bis(2-hydroxyethyl)alkyl (C8 C18) amine hydrochlorides SML(T) = 1.2 mg/kg (12) expressed as tertiary amine (expressed excluding HCl) Diphenyl sulphone SML(T) = 3 mg/kg (24) Plastic Materials and Articles in Contact with Food (Amendment) Regulations (Northern Ireland) 2003 file:///D/HTML/uk39571.htm[16.01.2025 11:43:44] SCHEDULE 3 Regulation 6 SUBSTANCE TO BE ADDED TO SCHEDULE 2B TO THE PRINCIPAL REGULATIONS Item PM/Ref No. Specifications 1 16690 Divinylbenzene - must not contain more than 40% ethylvinylbenzene EXPLANATORY NOTE (This note is not part of the Regulations.) These Regulations, which amend for the third time the Plastic Materials and Articles in Contact with Food Regulations (Northern Ireland) 1998 ("the principal Regulations"), implement Commission Directive 2002/17/EC amending Directive 90/128/EEC relating to plastic materials and articles intended to come into contact with foodstuffs (O.J. No. L58, 28.2.2002, p. 19), except paragraph 1(a) of the Annex and paragraph 2(a)(ii) of the Annex in so far as it relates to the additives benzaldehyde and camphor, which were implemented by the Plastic Materials and Articles in Contact with Food (Amendment) Regulations (Northern Ireland) 2002 (S.R. 2002 No. 316). The Regulations amend the principal Regulations by (a) adding a transitional provision in respect of proceedings for an offence under them (regulation 3); (b) adding new substances to the list of monomers which may be used in the manufacture of plastic materials or articles and amending the conditions of use of certain monomers used in such manufacture (regulation 4); (c) adding new substances to the non-exhaustive list of additives used in the manufacture of plastic materials or articles and amending the conditions of use of certain additives used in such manufacture (regulation 5); and (d) adding certain substances to the list of substances whose specifications are set out in Schedule 2B to the principal Regulations (regulation 6). Notes: [1] Formerly the Department of Health and Social Services; see S.I. 1999/283 (N.I. 1), Article 3(6)back [2] S.I. 1991/762 (N.I. 7) as amended by S.I.1996 /1633 (N.I. 12) and paragraphs 26 to 42 of Schedule 5 and Schedule 6 to the Food Standards Act 1999 c. 28back [3] O.J. No. L31, 1.2.2002, p. 1back [4] S.R. 1998 No. 264, as amended by S.R. 2000 No. 402 and S.R. 2002 No. 316back Plastic Materials and Articles in Contact with Food (Amendment) Regulations (Northern Ireland) 2003 file:///D/HTML/uk39571.htm[16.01.2025 11:43:44] Other Statutory Rules of Northern Ireland | UK Statutory Instruments | Home | Her Majesty's Stationery Office We welcome your comments on this site © Crown copyright 2003 Prepared 14 January 2003 [5] OJ No. L330, 5.12.1998, p. 32back ISBN 0 33794535 7 http://www.northernireland-legislation.hmso.gov.uk/legislation/northernireland/ni-srni.htm http://www.legislation.hmso.gov.uk/stat.htm file:/// http://www.hmso.gov.uk/ http://www.hmso.gov.uk/ http://www.hmso.gov.uk/hmsoform.htm