Agricultural Pesticides (Amendment) Rules, 2007

Law vision (Pakistan) Print Page AGRICULTURAL PESTICIDES, RULES, 1973 (Amendments) dated 21st June, 2007 (Amendments) 0 [Gazette of Pakistan (Extraordinary, Part, II, 21st June, 2007] S. R. O. 625(1)/2007, dated 20-6-2007, In exercise of the powers conferred by section 29 of the agricultural pesticides Agricultural Ordinance 1971 (II of 1971), the Federal Government, in consultation with Agricultural Pesticides Technical Advisory Committee, is pleased to direct that the following further amendment shall be made in the Agricultural Pesticides Rules, 1973, the same having been previously published bide Notification No. S. R. O. 433(1)/2007, dated the 26th May, 2007, as required by subsection (1) of the said section namely; In the aforesaid Rules, (a) After rule 4, the following new rule shall be inserted, namely; “4A. Registration for manufacturing a Me-Too technical grade material, (1) Subject to subsection (2) the Department of Plant Protection may grant provisional registration on Form 2A for manufacturing a Me-Too technical grade material after establishing the equivalency for a period of one year extendable on years basis for a period not exceeding three years. (2) The provisional registration shall be for a period of six months, pending establishment of equivalence may be granted in case the applicant is the original manufacturer, a subsidiary or a joint venture with the original manufacture of the predict which is currently registered and is being imported or used in Pakistan. (3) The provisional registration holder shall be entitled to manufacture the basic technical grade material in a manufacturing plant, duly registered with and certified by a department of plant protection, formulate and sell the formulated produce only, provided that he has the valid registration for the relevant formulated product from Department of Plant Protection. (4) The final registration of locally manufactured pesticides on Form 2B may be granted by the Department of Plant protection after biological tests under field conditions or field test, as the case may e, as provided under sub-rules (2) and (3) of rule 4 and after approval of the Agricultural Pesticides technical Advisory Committee. A manufacturer shall be entitled to sell the technical grade material to the Registered Formulators, after his final registration; and (b) IN rule 7A, (i) IN sub-rule (1), after figure “18”, the word and figure “and Form-20” shall be inserted; (ii) In sub-rule (1), after the word “rupees”, the word “as per guidelines issued by the Department of plant protection” shall be added; and (iii) IN sub-rule (5), for the word and figure “and 19A”, comma, words and figures “Form 19A and Form 20A” shall be substituted, FORM – 2A [See rule 4A (1)] CERTIFICATE OF PROVISIONAL REGISGTRATION OF LOCALLY MANUFACTURED PESTICIDE TECHNICAL (ME-TOO PRODUCT) Name of Manufacturer/Undertaking Address Registration No Date of issue Valid up to Name of Pesticide (Technical/Formulation) Pesticide formulation approved for use Note. Detail TOR’s on the reverse page Advisor and Director General Page 1 of 5 11/01/2011http://www.lawvisionpk.com/law-pakistan/show contents.php?tid=7216 DPP Stamp FORM – 2B [See rule 4A (4)] CERTIFICATE OF REGISGTRATION OF LOCALLY MANUFACTURED PESTICIDE TECHNICAL (ME-TOO PRODUCT) Name of Manufacturer/Undertaking Address Registration No Date of issue Valid up to Name of Pesticide (Technical/Formulation) Pesticide formulation approved for use Note. Detail TOR’s on the reverse page Advisor and Director General DPP Stamp FORM – 20 [See rule 7A (1)] (APPLICATION FOR REGISTRATION OF PLANT FOR MANUFACTURING PESTICIDES (TECHNICAL GRADE MATERIAL) IN PAKISTAN 1. Name, address and other particular of applicant (i) Street address (ii) Tel. /Fax (iii) E-mail (iv) Website (v) Manufacturing Plant 2. Type of Plant I Liquid/Aqueous/Solvent based, granules, 3. Pesticide for which license is required. 4. List of major equipment (Annexure- - A) 5. Details of technical staff. 6. Plant safety (Please tick appropriate box) (i) Safety staff (Give No. Please) (ii) Ventilation (Type) (iii) Fire-fighting equipment (Annexure-B) (iv) Emergency shower and eyewash. (v) Protective equipment; (vi) Protected/explosion proof electrical installations (duly certified by electrical Inspector) 7. Analytical quality control Lab. Y N Y N Y N Y N Page 2 of 5 11/01/2011http://www.lawvisionpk.com/law-pakistan/show contents.php?tid=7216 (Analytical facilities exist on site) Details of equipment (annexure -C) 8. Filling facilities (Please specify) FOR LIQUIDS (a) Pneumatic or ex-proof automation; (b) Accurate measured quantity automatic dispensing: (c) Safety device on main opening of filling unit: (d) Automatic nitrogen purging system: (e) Automatic/semi-automatic heat sealing system: (ii) For Solids (a) Accurate measured quantity automatic dispersing: (b) Automatic/semi-automatic remaining process: 9. Rework (a copy of the written procedure) 10. Packaging and Transport (Details of packaging and transport facilities) 11. Warehouse and storage of pesticides (i) Type of storage (Brick/Concrete/sheets/wood) Floors: (Pervious/impervious) (ii) Dimensions (iii) Capacity (iv) Shared portables (Details attached). 12. Occupational health Site medical practitioner (Full time Part time) 13. Waste disposal (i) Effluent and waste water disposal system (give details). (ii) Solid waste disposal system (give details) (iii) Emission monitoring system (give details) (iv) In house incinerator (give details) 14. Registration fee Rs.25, 000/- and Rs. 10,000/- for each subsequent additional product to be Y N Y N Y N Y N Y N Y N Y N Y N Page 3 of 5 11/01/2011http://www.lawvisionpk.com/law-pakistan/show contents.php?tid=7216 manufactured 15. Any other additional information I do hereby apply for registration of the pesticide manufacturing plant particulars of which are given above and hereby certify that these particulars are to the best of my knowledge true and correct. Signature of the applicant Date Note: Pesticides manufacturing plant May be registered after satisfactory inspection and verification report to the above facts from the designated committee constituted by the department of plant protection. ANNEXURE – A LEST OF MACHINERY AND EQUIPMENT ANNEXURE – B FIRE FIGHTING EQUIPMENT ANNEXURE – C DETAILS OF EQUIPMENT FORM – 20B [See rule 7A (5)] No………………………………. Certificate of Registration For Manufacturing Plant (6) In exercise of powers under rule 7A of Agricultural Pesticides Rules, 1973, the manufacturing plant with the particulars given below is hereby registered: (i) Name of undertaking (ii) Address/Head office (Tel, Fax, E-mail & Website address) (iii) Registration No. (iv) Type of Manufacturing Plant. (v) Name of Insecticide/Herbicide/Fungicide/Infanticide The certificate of registration is valid up to………………..The registration shall be subject to the following conditions, (i) The manufacturer will maintain the record of inventory in the inventory register in such a way that traceability for each manufactured batch right from raw material to the finished product is ensured and will produce the same to the Department of Plant Protection or any of its officers as and when required. (ii) The rework of the products recalled from the market, as the case may be, dealers shall not be carried out without prior written permission from this Department. (iii) The shared parables will be duly marked and their movement recorded. (iv) The undertaking will adhere to and follow good manufacturing practices regarding contamination prevention. Machinery/Equipment/Model Make No. Quantity Equipment Quantity Equipment Quantity Page 4 of 5 11/01/2011http://www.lawvisionpk.com/law-pakistan/show contents.php?tid=7216 (v) The undertaking will notify changes in technical manpower. (vi) Addition in the product range shall be through permission from the Department of Plant protection and fee of Rs. 10,000 shall be paid for each additional product (vii) This certificate of registration shall be kept in original at a prominent place in the premises of the registered manufacturing plant and must be accessible to the notified inspectors. (viii) The samples from each manufactured batch will be retained for one year. Signature of Registering Officer Dated: Seal Case Law Copyrights @ Law vision (Pakistan) all Rights Reserved Page 5 of 5 11/01/2011http://www.lawvisionpk.com/law-pakistan/show contents.php?tid=7216