Water Well Driller Trade Regulation (Alta Reg. 210/2000)

© Published by Alberta Queen’s Printer E-mail: qp@gov.ab.ca Shop on-line at www.qp.alberta.ca Alberta Queen’s Printer 5th Floor, Park Plaza 10611 - 98 Avenue Edmonton, AB T5K 2P7 Phone: 780-427-4952 Fax: 780-452-0668 Province of Alberta Office Consolidation Alberta Regulation 310/2000 With amendments up to and including Alberta Regulation 183/2010 APPRENTICESHIP AND INDUSTRY TRAINING ACT WATER WELL DRILLER TRADE REGULATION Copyright and Permission Statement Alberta Queen's Printer holds copyright on behalf of the Government of Alberta in right of Her Majesty the Queen for all Government of Alberta legislation. Alberta Queen's Printer permits any person to reproduce Alberta’s statutes and regulations without seeking permission and without charge, provided due diligence is exercised to ensure the accuracy of the materials produced, and Crown copyright is acknowledged in the following format: © Alberta Queen's Printer, 20 .* *The year of first publication of the legal materials is to be completed. Note All persons making use of this consolidation are reminded that it has no legislative sanction, that amendments have been embodied for convenience of reference only. The official Statutes and Regulations should be consulted for all purposes of interpreting and applying the law. (Consolidated up to 183/2010) ALBERTA REGULATION 310/2000 Apprenticeship and Industry Training Act WATER WELL DRILLER TRADE REGULATION Table of Contents 1 Definitions General Matters Respecting the Trade 2 Constitution of the trade 3 Tasks, activities and functions Apprenticeship 4 Term of the apprenticeship program 5 Employment of apprentices 6 Wages Transitional Provisions, Repeals, Expiry and Coming into Force 7 Apprenticeship continues 8 Repeal 9 Expiry 10 Coming into force Definitions 1 In this Regulation, (a) “apprentice” means a person who is an apprentice in the trade; (b) “certified journeyperson” means a certified journeyperson as defined in the Apprenticeship Program Regulation; (c) “technical training” means technical training as defined in the Apprenticeship Program Regulation; (d) “trade” means the occupation of water well driller that is designated as an optional certification trade pursuant to the Apprenticeship and Industry Training Act; Section 2 AR 310/2000 WATER WELL DRILLER TRADE REGULATION 2 (e) “uncertified journeyperson” means an uncertified journeyperson as defined in the Apprenticeship Program Regulation. AR 310/2000 s1;270/2006 General Matters Respecting the Trade Constitution of the trade 2 The following undertakings constitute the trade: (a) the designing, drilling, construction, development, servicing, disinfecting, sanitation, reconditioning and decommissioning of water wells; (b) the repairing, servicing, installing and disinfecting of water well pumps and systems. AR 310/2000 s2;154/2007;137/2008 Tasks, activities and functions 3 When practising or otherwise carrying out work in the trade, the following tasks, activities and functions come within the trade: (a) completing a bore hole into a finished productive well; (a.1) completing and grouting a bore hole; (b) completing well records and reports as required by the industry; (c) completing well records and reports as required by the Government of Alberta; (d) operating the tools of the trade; (e) operating and maintaining equipment for drilling wells; (f) heating and cutting metal using the appropriate equipment; (g) connecting and installing electrical connections to water pumps; (h) identifying and applying the standards and regulations governing the ground water industry; (i) identifying and describing geological formations; (j) operating drilling systems; (k) exploring for ground water; Section 4 AR 310/2000 WATER WELL DRILLER TRADE REGULATION 3 (l) recognizing ground water flow; (m) interpreting chemical content of ground water; (n) monitoring natural gas in domestic water wells; (o) monitoring ground water. AR 310/2000 s3;183/2010 Apprenticeship Term of the apprenticeship program 4(1) Subject to credit for previous training or experience being granted pursuant to an order of the Board, the term of an apprenticeship program for the trade is 2 periods of not less than 12 months each. (2) In the first period of the apprenticeship program an apprentice must acquire not less than 1800 hours of on the job training and successfully complete the technical training that is required or approved by the Board. (3) In the 2nd period of the apprenticeship program an apprentice must acquire not less than 1800 hours of on the job training and successfully complete the technical training that is required or approved by the Board. Employment of apprentices 5(1) Where a person employs an apprentice, that employment must be carried out in accordance with this section. (2) A person who is a certified journeyperson or an uncertified journeyperson in the trade or employs a certified journeyperson or an uncertified journeyperson in the trade may employ 2 apprentices and 2 additional apprentices for each additional certified journeyperson or uncertified journeyperson in the trade that is employed by that person. AR 310/2000 s5;270/2006 Wages 6(1) Subject to the Apprenticeship Program Regulation, a person shall not pay wages to an apprentice that are less than those provided for under subsection (2). (2) Subject to the Employment Standards Code, a person employing an apprentice must pay wages to the apprentice that are at least equal to the following percentages of the wages paid to Section 7 AR 310/2000 WATER WELL DRILLER TRADE REGULATION 4 employees who are certified journeypersons or uncertified journeypersons in the trade: (a) 60% in the first period of the apprenticeship program; (b) 85% in the 2nd period of the apprenticeship program. AR 310/2000 s6;270/2006 Transitional Provisions, Repeals, Expiry and Coming into Force Apprenticeship continues 7 A person who immediately prior to January 1, 2001 was an apprentice in an apprenticeship program under the Water Well Driller Trade Regulation (AR 203/94) continues as an apprentice in that apprenticeship program under this Regulation. Repeal 8 The Water Well Driller Trade Regulation (AR 203/94) is repealed. Expiry 9 For the purpose of ensuring that this Regulation is reviewed for ongoing relevancy and necessity, with the option that it may be repassed in its present or an amended form following a review, this Regulation expires on August 31, 2018. AR 310/2000 s9;278/2004;183/2010 Coming into force 10 This Regulation comes into force on January 1, 2001.