National Environmental Management: Waste Act: National norms and Standards for the storage of waste (GN. 22 of 2019)

NOM LA PAULA MOKONYANE MINIS R OF ENVIRONMENTAL AFFAIRS This gazette is also available free online at www.gpwonline.co.za 4 No. 42175 GOVERNMENT GAZETTE, 21 JANUARY 2019 Government notices • GoewermentskennisGewinGs Environmental Affairs, Department of/ Omgewingsake, Departement van DEPARTMENT OF ENVIRONMENTAL AFFAIRS NO. 22 21 JANUARY 2019 22 National Environmental Management: Waste Act (59/2008): Regulations Regarding the Control of the Import or Export of Waste 42175 Requirements when applying for the import of hazardous waste 6. Requirements when applying for the import of non- hazardous waste Requirements when applying for the export of hazardous waste 8. Requirements when applying for the export of non -hazardous waste 9. Requirements when applying for the transit of hazardous waste This gazette is also available free online at www.gpwonline.co.za STAATSKOERANT, 21 JANUARIE 2019 No. 42175 5 This gazette is also available free online at www.gpwonline.co.za 6 No. 42175 GOVERNMENT GAZETTE, 21 JANUARY 2019 "importer" means person who receives or intends to receive waste into the Republic other than receipt for transit; "movement document" means the form provided Annexure 2 of these Regulations; "notification document" means the notification form for the import, export or transit of waste provided Annexure 1 of these Regulations; "re- import" means the import of waste that left the country of export legally but is being returned, or is expected to be returned, to the country of export; 1, In these Regulations, any word or expression to which meaning has been assigned the Act has that same meaning, and unless the context indicates otherwise "consent" means an approval to import, transit or export waste issued by the competent authority; "country of export" means a country from which the transboundary movement of waste is planned to be initiated or is initiated; "country of import" means a country to which waste is planned to be transported to as a final destination; "country of transit" means a country through which the waste will travel or is planned to travel through route to its final destination; "Department" means the national department responsible for environmental affairs; "developed country" means members of the Organisation for Economic Co- operation and Development (OECD), European Community (EC) and Liechtenstein; "developing country" means all other countries not members of the Organisation for Economic Co operation and Development (OECD), European Community (EC) and Liechtenstein; This gazette is also available free online at www.gpwonline.co.za STAATSKOERANT, 21 JANUARIE 2019 No. 42175 7 No person may: (a) import any waste from country without following legislation required for that transboundary movement of waste, transit any waste through South Africa, without following legislation required for that transboundary movement of waste, or (d) re- import waste from country without following legislation required for that transboundary movement of waste. These Regulations do not apply to (a) the export of ferrous and non- ferrous waste and scrap as defined in the Export Control Guidelines on the Exportation of Ferrous and Non -Ferrous Waste and Scrap from International Trade Administration Commission of South Africa; This gazette is also available free online at www.gpwonline.co.za 8 No. 42175 GOVERNMENT GAZETTE, 21 JANUARY 2019 a Waste Management License for the receiving waste treatment facility; contract between an exporter and an importer; (e) contract between the importer and waste treatment facility, where the importer is not the owner of the waste treatment facility; applicable insurance or other financial guarantee covering the movement of waste and environmental clean -up in case of an incident; and (3) (4) No (5) No person may import mixed wastes streams. This gazette is also available free online at www.gpwonline.co.za STAATSKOERANT, 21 JANUARIE 2019 No. 42175 9 a completed notification form; a Waste Management License for the receiving waste treatment facility or equivalent legal document in the country of export; and a contract between an exporter and an importer. An application for the transit of hazardous waste submitted to the Department must minimum, include the following a letter of request from the Competent Authority from the country of export; a completed notification form; and applicable insurance or other financial guarantee covering the movement of waste and environmental clean -up in case of an incident. (a) a letter of request from the exporter; a completed notification form; a Waste Management License for the receiving waste treatment facility or equivalent legal document in the country of export; (d) a contract between an exporter and an importer; (e) applicable insurance or other financial guarantee covering the movement of waste; and environmental clean -up in case of an incident; and This gazette is also available free online at www.gpwonline.co.za 10 No. 42175 GOVERNMENT GAZETTE, 21 JANUARY 2019 When undertaking the transboundary movement for the import of waste: (a) the importer shall inform the Department of the transboundary movement by submitting movement document at least 7 days before the shipment reaches the port; the transporter must present the Consent at the port; and the importer must, within 30 days of reuse, recycling or recovery of the waste, provide the Department with a Safe Disposal Certificate from the waste treatment facility. A written consent for the import, export or transit of waste must contain the information: Name of applicant and their contact details; Names of the importer and exporter; Country of import, export or transit; Name of receiving waste treatment facility; (e) Type of waste; Quantity of waste; This gazette is also available free online at www.gpwonline.co.za STAATSKOERANT, 21 JANUARIE 2019 No. 42175 11 (a) inform the Department in writing within two days of non -acceptance by the waste treatment facility and provide the reason(s) thereof; provide proposed corrective measures for the waste to the Department, seven days from the date of reporting; in the event where corrective measures are not submitted, the Department's instruction concerning what must happen to the waste will be given within 21 days from the date of reporting; (e) where corrective measures are approved by the Department, the importer must within two months after the day on which the Department approved the corrective measures, manage the waste according to that approval; cover the cost of storage and any other applicable cost; and (a) (b) quantity of waste; (c) origin /source of waste; (d) destination of waste; (e) date of import or export; the importer may be instructed to return the waste to the exporter at the importer's own cost within 90 days of import. When undertaking the transboundary movement for the export of waste: (a) the exporter shall inform the Department of the transboundary movement by submitting movement document at least 7 days before the shipment reaches the port; the transporter must present the Consent at the port. This gazette is also available free online at www.gpwonline.co.za 12 No. 42175 GOVERNMENT GAZETTE, 21 JANUARY 2019 if applicable, the South African Waste Information System (SAWIS) registration number in terms of the National Waste Information Regulations, 2013 The records contemplated in Regulation 5, 6, 7, 8 and 9 must (a) retained for a period of at least five years; and This gazette is also available free online at www.gpwonline.co.za STAATSKOERANT, 21 JANUARIE 2019 No. 42175 13 Notification document for transboundary movements/shipments of waste 1. Exporter - notifier Registration No: Name: Address: Contact person: Tel: Fax: E -mail: 3. Notification No: Notification concerning A.(i) Individual shipment: B.(i) Disposal (1): (ii) Recovery : C. Pre -consented recovery facility (2;3) Yes No 4. Total intended number of shipments: 5. Total intended quantity (9): Tonnes (Mg): m3: 2. Importer - consignee Registration No: Name: Address: Contact person: Tel: Fax: E -mail: 6. Intended period of time for shipment(s) (9): First departure: Last departure: 7. Packaging type(s) (5): Special handling requirements (6): Yes: No: 11. Disposal I recovery operation(s) (2) D -code l R-code (5): Technology employed (6): Reason for export 0;6): 8. Intended carrier(s) Registration No: Name(7): Address: Contact person: Tel: Fax: E -mail: Means of transport (5): 12. Designation and composition of the waste (6): 9. Waste generator(s) producer(s) (1;7;8) Registration No: Name: Address: Contact person: Tel: Fax: E -mail: Site and process of generation Country of origin of waste 13. Physical characteristics (5): 14. Waste identification (fill in relevant codes) (i) Basel Annex VIII (or IX if applicable): (ii) OECD code (if different from (i)): (iii) EC list of wastes: (iv) National code in country of export: (v) National code in country of import: (vi) Other (specify): (vii) Y -code: (viii) H-code (5): (ix) UN class (5): (x) UN Number: (xi) UN Shipping name: (xii) Customs code(s) (HS): 10. Disposal facility (2): or recovery facility (2): Registration No: Name: Address: Contact person: Tel: Fax: E -mail: Actual site of disposal /recovery: 15. (a) Countries/States concerned, (b) Code no. of competent authorities where applicable, (c) Specific points of exit or entry (border crossing or port) State of export - dispatch State(s) of transit (entry and exit) State of import - destination (a) (b) (c) I I I 16.Customs offices of entry andlor exit andlor export (European Community): Entry: Exit Export: 17. Exporter's - notlfier's ! generator's - producer's (1) declaration: I certify that the information is complete and correct to my best knowledge. I also certify that legally enforceable written contractual obligations have been entered into and that any applicable insurance or other financial guarantee is or shall be in force covering the transboundary movement. Exporter's - notifies name: Date: Signature: Generator's - producer's name: Date: Signature: 18. Number of annexes attached FOR USE BY COMPETENT AUTHORITIES 19. Acknowledgement from the relevant competent authority of countries of import - destination ! transit (1)/ export - dispatch (9): Country: Notification received on: Acknowledgement sent on: Name of competent authority: Stamp andlor signature: 20. Written consent (1;8) to the movement provided by the competent authority of (country): Consent given on: Consent valid from: Specific conditions: No: Name of competent authority: Stamp andlor signature: (1) Required by the Basel Convention for hazardous waste (2) In the case of an R121R13 or D13-D15 operation, also attach corresponding information on any subsequent R121R13 or Di 3D15 facilities and on the subsequent R1 -R11 or Dl-D12 facilit(y)ies when required (3) To be completed for movements within the OECD area and only if B(ii) applies (4) Attach detailed list if multiple shipments (5) See list of abbreviations and codes on the next page (6) Attach details if necessary (7) Attach list if more than one (8) ff required by national legislation (9) If applicable under the OECD Decision This gazette is also available free online at www.gpwonline.co.za 14 No. 42175 GOVERNMENT GAZETTE, 21 JANUARY 2019 1. Corresponding to notification No: 2. Serialltotal number of shipments: i 3. Exporter - notifier Registration No: I t Importer - consignee Registration No: I Name: I Name: I Address: I Address: I Contact person: I Contact person: I Tel: I I Fax: I Tel: I Fax: E -mail: I E -mail: 5. Actual quantity: Tonnes (Mg): I I m3: I 6. Actual date of shipment: I 7. Packaging I Type(s) (1): I Number of packages: I Special handling requirements: (2) Yes No: p 8.(a) 1st Carrier (3): 8.(b) 2nd Carrier: 8.(c) Last Carrier: Registration No: I + Registration No: Registration No: Name: I Name: I Name: I Address: I Address: I Address: I Tel: Tel: Ter: Fax: Fax: Fax: E -mail: E -mail: E -mail: To be completed by carver's representative More than 3 carriers (2) Means of transport (1): I Means of transport (1): I Means of transport (9: I Date of transfer: I Date of transfer: I Date of transfer: I Signature: I Signature: I Signature: I 9. Waste generators) - producer(s) (4;5;6): 12. Designation and composition of the waste (2): Registration No: I Name: Address: Contact person: I 13.Physical characteristics (1): I Tel: I Fax: I E -mail: 14.Waste identification (fill in relevant codes) Site of gene ation (2): (i) Basel Annex VIII (or IX if applicable):Country of origin of waste 10. Disposal facility I n I or recovery facility I n (ii) OECD code (if different from (i)): I Registration No: I (iii) EC list of wastes: I Name: I (iv) National code in country of export: Address: I (v) National code in country of import: (vi) Other (specify): I Contact person: I (vii) Y -code: Tel: I I Fax: I (viii) H -code (1): I E -mail: (ix) UN class (1): Actual site of disposal/recovery (2) I (x) UN Number 11. Disposallrecovery operation(s) (xi) UN Shipping name: I D-code 1 R -code (1): I (xii) Customs code(s) (FS): I 15. Exporter's - notifier's t generator's producer's (4) declaration: I certify that the above information is complete and correct to my best knowledge. I also certify that legally enforceable written contractual obligations have been entered into, that any applicable insurance or other financial guarantee is in force covering the transboundary movement and that all necessary consents have been received from the competent authorities of the countries concerned. Name: I I Date: I I Signature: I 16. For use by any person involved in the transboundary movement in case additional information is required 17. Shipment received by importer consignee (if not facility): Date: I Name: I Signature: TO BE COMPLETED BY DISPOSAL I RECOVERY FACILITY 18. Shipment received at disposal facility or recovery facility n 19.1 certify that the disposallrecovery of the Date of reception: I Accepted: n I Rejected *: n waste described above has been completed. Quantity received: Tonnes (Mg): m3 'immediately contact competent authorities Name: Approximate date of disposallrecovery: I Disposal /recovery operation (1): I Date: This gazette is also available free online at www.gpwonline.co.za STAATSKOERANT, 21 JANUARIE 2019 No. 42175 15 FOR USE BY CUSTOMS OFFICES (if required by national legislation) 20. Country of export - dispatch or customs office of exit 21. Country of import - destination or customs office of entry 22. Stamps of customs offices of transit countries Name of country Entry Exit' Name of country Entry Exit Name of country. Entry. Exit. Name of country. Entry. Exit Name: Signature and stamp: Date: Signature: (1) See list of abbreviations and codes on the next page (2) Attach details if necessary (3) If more than 3 camera, attach information as required in blocks 8 (a, b, c). (4) Required by the Basel Convention for hazardous waste (5) Attach list if more than one (6) If required by national legislation This gazette is also available free online at www.gpwonline.co.za 16 No. 42175 GOVERNMENT GAZETTE, 21 JANUARY 2019 8 Bulk 9 Other (specify) Other (specify) 1. Drum 2. Wooden barrel 3. Jerrican 4. Box 5. Bag 6. Composite packaging 7. Pressure receptacle D1 Deposit into or onto land, (e.g., landfill, etc.) D2 Land treatment, (e.g., biodegradation of liquid or sludgy discards in soils, etc.) D3 Deep injection, (e.g., injection of pumpable discards into wells, salt domes or naturally occurring repositories, etc.) D4 Surface impoundment, (e.g., placement of liquid or sludge discards into pits, ponds or lagoons, etc.) D5 Specially engineered landfill, (e.g., placement into lined discrete cells which are capped and isolated from one another and the environment, etc,) D6 Release into a water body except seas /oceans D7 Release into seas /oceans including sea -bed insertion D8 Biological treatment not specified elsewhere in this list which results in final compounds or mixtures which are discarded by means of any of the operations in this list D9 Physico -chemical treatment not specified elsewhere in this list which results in final compounds or mixtures which are discarded by means of any of the operations in this list (e.g., evaporation, drying, calcination, etc.) D10 Incineration on land D11 Incineration at sea D12 Permanent storage, (e.g., emplacement of containers in a mine, etc.) D13 Blending or mixing prior to submission to any of the operations in this list D14 Repackaging prior to submission to any of the operations in this list D15 Storage pending any of the operations in this list Use as a fuel (other than in direct incineration) or other means to generate energy (Basel /OECD) - Use principally as a fuel or other means to generate energy (EU) R2 Solvent reclamation /regeneration Recycling /reclamation of organic substances which are not used as solvents Recycling/reclamation of metals and metal compounds Recycling /reclamation of other inorganic materials Regeneration of acids or bases Recovery of components used for pollution abatement Recovery of components from catalysts Used oil re- refining or other reuses of previously used oil R10 Land treatment resulting in benefit to agriculture or ecological improvement Uses of residual materials obtained from any of the operations numbered R1 -R10 R12 Exchange of wastes for submission to any of the operations numbered R1 -R11 R13 Accumulation of material intended for any operation in this list. UN Class H-code Characteristics 1 H1 Explosive 3 H3 Flammable liquids 4.1 H4,1 Flammable solids 4.2 H4.2 Substances or wastes liable to spontaneous combustion 4.3 H4.3 Substances or wastes which, in contact with water, emit flammable gases 5.1 H5.1 Oxidizing 5.2 H5.2 Organic peroxides 6.1 H6.1 Poisonous (acute) 6.2 H6,2 Infectious substances 8 H8 Corrosives 9 H10 Liberation of toxic gases in contact with air or water 9 H11 Toxic (delayed or chronic) 9 H12 Ecotoxic 1413 Capable, by any means, after disposal of yielding another material, e. g., leachate, which possesses any of the characteristics listed above1. Powdery/powder 2. Solid 3. Viscous /paste 4. Sludgy 5. Liquid 6. Gaseous This gazette is also available free online at www.gpwonline.co.za STAATSKOERANT, 21 JANUARIE 2019 No. 42175 17 HAZRDOUS WASTE STREAMS Y1 Clinical wastes from medical care in hospitals, medical centres and clinics Y2 Wastes from the production and preparation of pharmaceutical products Y3 Waste pharmaceuticals, drugs and medicines Y4 Wastes from the production, formulation and use of biocides and phytopharmaceuticals Y5 Wastes from the manufacture, formulation and use of wood preserving chemicals Y6 Wastes from the production, formulation and use of organic solvents Y7 Wastes from heat treatment and tempering operations containing cyanides Y8 Waste mineral oils unfit for their originally intended use Y9 Waste oils /water, hydrocarbons /water mixtures, emulsions Y10 Waste substances and articles containing or contaminated with polychlorinated biphenyls (PCBs) and /or polychlorinated terphenyls (PCTs) and /or polybrominated biphenyls (PBBs) Y11 Waste tarry residues arising from refining, distillation and any pyrolytic treatment Y12 Wastes from production, formulation and use of inks, dyes, pigments, paints, lacquers, varnish Y13 Wastes from production, formulation and use of resins, latex, plasticizers, glues /adhesives Y14 Waste chemical substances arising from research and development or teaching activities which are not identified and /or are new and whose effects on man and /or the environment are not known Y15 Wastes of an explosive nature not subject to other legislation Y16 Wastes from production, formulation and use of photographic chemicals and processing materials Y17 Wastes resulting from surface treatment of metals and plastics Y18 Residues arising from industrial waste disposal operations WASTES HAVING AS CONSTITUENTS Y19 Metal carbonyls Y20 Beryllium; beryllium compounds Y21 Hexavalent chromium compounds Y22 Copper compounds Y23 Zinc compounds Y24 Arsenic; arsenic compounds Y25 Selenium; selenium compounds Y26 Cadmium; cadmium compounds Y27 Antimony; antimony compounds Y28 Tellurium; tellurium compounds Y29 Mercury; mercury compounds Y30 Thallium; thallium compounds Y31 Lead; lead compounds Y32 Inorganic fluorine compounds excluding calcium fluoride Y33 Inorganic cyanides Y34 Acidic solutions or acids in solid form Y35 Basic solutions or bases in solid form Y36 Asbestos (dust and fibres) Y37 Organic phosphorus compounds Y38 Organic cyanides Y39 Phenols; phenol compounds including chlorophenols Y40 Ethers Y41 Halogenated organic solvents Y42 Organic solvents excluding halogenated solvents Y43 Any congenor of polychlorinated dibenzo -furan Y44 Any congenor of polychlorinated dibenzo -p- dioxin Y45 Organohalogen compounds other than substances referred to in this Annex (e.g. Y39, Y41, Y42, Y43, Y44) Y46 Wastes collected from households Residues arising from the incineration of household wastes This gazette is also available free online at www.gpwonline.co.za 18 No. 42175 GOVERNMENT GAZETTE, 21 JANUARY 2019 the following: Antimony; antimony compounds Beryllium; beryllium compounds Cadmium; cadmium compounds Lead; lead compounds Selenium; selenium compounds Annexure 5 hazardous waste List A: Al METAL AND METAL -BEARING WASTE Code Description A1010 Metal wastes and waste consisting of alloys of any of the following: Lead but excluding such wastes specifically listed on list B A1020 Waste having as constituents or contaminants, excluding metal waste in massive form, any of Tellurium; tellurium compounds A1030 Wastes having as constituents or contaminants any of the following: Arsenic; arsenic compounds Mercury; mercury compounds Thallium; thallium compounds A1040 Wastes having as constituents any of the following: Metal carbonyls Hexavalent chromium compounds A1050 Galvanic sludges A1060 Waste liquors from the pickling of metals A1070 Leaching residues from zinc processing, dust and sludges such as jarosite, hematite, etc, A1080 Waste zinc residues not included on list B, containing lead and cadmium in concentrations sufficient to exhibit characteristics A1090 Ashes from the incineration of insulated copper wire A1100 Dusts and residues from gas cleaning systems of copper smelters A1110 Spent electrolytic solutions from copper electrorefining and eiectrowinning operations A1120 Waste sludges, excluding anode slimes, from electrolyte purification systems in copper electrorefining and electrowinning operations A1130 Spent etching solutions containing dissolved copper A1140 Waste cupric chloride and copper cyanide catalysts A1150 Precious metal ash from incineration of printed circuit boards not included on list B8 A1160 Waste lead -acid batteries, whole or crushed A1170 Unsorted waste batteries excluding mixtures of only list B batteries. Waste batteries not specified on list B containing Annex I constituents to an extent to render them hazardous A1180 Waste electrical and electronic assemblies or scrap9 containing components such as accumulators and other batteries included on list A, mercury- switches, glass from cathode -ray tubes and other activated glass and PCB capacitors, or contaminated with Annex i constituents (e.g., cadmium, mercury, lead, polychlorinated biphenyl) to an extent that they possess any of the characteristics contained in Annex ill (note the related entry on list B B1110)10 This gazette is also available free online at www.gpwonline.co.za STAATSKOERANT, 21 JANUARIE 2019 No. 42175 19 Y ''. ' 'ONE List A: A2 WASTES CONTAINING PRINCIPALLY INORGANIC CONSTITUENTS, WHICH MAY CONTAIN METALS AND ORGANIC MATERIALS L'I scrJpt A2010 Glass waste from cathode -ray tubes and other activated glasses A2020 Waste inorganic fluorine compounds in the form of liquids or sludges but excluding such wastes specified on list B A2030 Waste catalysts but excluding such wastes specified on list B A2040 Waste gypsum arising from chemical industry processes, when containing Annex I constituents to the extent that it exhibits an Annex III hazardous characteristic (note the related entry on list B B2080) A2050 Waste asbestos (dusts and fibres) A2060 Coal -fired power plant fly -ash containing Annex 1 substances in concentrations sufficient to exhibit Annex Ill characteristics (note the related entry on list B B2050) List A: A3 WASTES CONTAINING PRINCIPALLY ORGANIC CONSTITUENTS, WHICH MAY CONTAIN METALS AND INORGANIC MATERIALS Waste from the production or processing of petroleum coke and bitumen A3020 Waste mineral oils unfit for their originally intended use A3030 Wastes that contain, consist of or are contaminated with leaded anti -knock compound sludges A3040 Waste thermal (heat transfer) fluids A3050 Wastes from production, formulation and use of resins, latex, plasticizers, glues/ adhesives excluding such wastes specified on list B (note the related entry on list B B4020) A3060 Waste nitrocellulose A3070 Waste phenols, phenol compounds including chlorophenol in the form of liquids or sludges A3080 Waste ethers not including those specified on list B A3090 Waste leather dust, ash, sludges and flours when containing hexavalent chromium compounds or biocides (note the related entry on list B B3100) A3100 Waste paring and other waste of leather or of composition leather not suitable for the manufacture of leather articles containing hexavalent chromium compounds or biocides (note the related entry on list B B3090) A3110 Fellmongery wastes containing hexavalent chromium compounds or biocides or infectious substances (note the related entry on list B B3110) A3120 Fluff - light fraction from shredding A3130 Waste organic phosphorous compounds A3140 Waste non -halogenated organic solvents but excluding such wastes specified on list B A3150 Waste halogenated organic solvents Waste halogenated or unhalogenated non -aqueous distillation residues arising from organic solvent recovery operations A3160 A3170 Wastes arising from the production of aliphatic halogenated hydrocarbons (such as chloromethane, dichloro- ethane, vinyl chloride, vinylidene chloride, allyl chloride and epichlorhydrin) A3180 Wastes, substances and articles containing, consisting of or contaminated with polychlorinated biphenyl (PCB), poly -chlorinated terphenyl (PCT), polychlorinated naphthalene (PCN) or polybrominated biphenyl (PBB), or any other polybrominated analogues of these compounds, at a concentration level of 50 mg /kg or more12 This gazette is also available free online at www.gpwonline.co.za 20 No. 42175 GOVERNMENT GAZETTE, 21 JANUARY 2019 A3190 Waste tarry residues (excluding asphalt cements) arising from refining, distillation and any pyrolitic treatment of organic materials A3200 Bituminous material (asphalt waste) from road construction and maintenance, containing tar (note the related entry on list B, B2130) List A: A4 WASTES WHICH MAY CONTAIN EITHER INORGANIC OR ORGANIC CONSTITUENTS It. idli Descripttpp A4010 Wastes from the production, preparation and use of pharmaceutical products but excluding such wastes specified on list B A4020 Clinical and related wastes; that is wastes arising from medical, nursing, dental, veterinary, or similar practices, and wastes generated in hospitals or other facilities during the investigation or treatment of patients, or research projects A4030 Wastes from the production, formulation and use of biocides and phytopharmaceuticals, including waste pesticides and herbicides which are off -specification, outdated,15 or unfit for their originally intended use A4040 Wastes from the manufacture, formulation and use of wood -preserving chemicals14 A4050 Wastes that contain, consist of or are contaminated with any of the following: Inorganic cyanides, excepting precious -metal- bearing residues in solid form traces of inorganic cyanides Organic cyanides A4060 Waste oils /water, hydrocarbonslwater mixtures, emulsions A4070 Wastes from the production, formulation and use of inks, dyes, pigments, paints, lacquers, varnish excluding any such waste specified on list B (note the related entry on list B B4010) A4080 Wastes of an explosive nature (but excluding such wastes specified on list B) A4090 Waste acidic or basic solutions, other than those specified in the corresponding entry on list B (note the related entry on list B B2120) A4100 Wastes from industrial pollution control devices for cleaning of industrial off-gases but excluding such wastes specified on list B A4110 Wastes that contain, consist of or are contaminated with any of the following: Any congenor of polychlorinated dibenzo -furan Any congenor of polychlorinated dibenzo -P- dioxin A4120 Wastes that contain, consist of or are contaminated with peroxides A4130 Waste packages and containers containing Annex I substances in concentrations sufficient to exhibit hazard characteristics A4140 Waste consisting of or containing off specification or outdated15 chemicals corresponding with hazard characteristics A4150 Waste chemical substances arising from research and development or teaching activities which are not identified and/or are new and whose effects on human health and/or the environment are not known A4160 Spent activated carbon not included on list B (note the related entry on list B B2060) 13 "Outdated" means unused within the period recommended by the manufacturer. 14 This entry does not include wood treated with wood preserving chemicals. NB: In the event where the annexure come into question on the o the category of the waste in Annexure 5, then the classification of the waste in terms of SANS 10234 or latest SANS version shall apply in accordance with Regulation 4(2) of the Waste Classification and Management Regulation, GNR 634 of 2013. This gazette is also available free online at www.gpwonline.co.za STAATSKOERANT, 21 JANUARIE 2019 No. 42175 21 Annexure 6 B -codes for use when completing the Notification document when importing or exporting non -hazardous List B: 131 METAL AND METAL -BEARING WASTES Description B1010 Metal and metal -alloy wastes in metallic, non -dispersible form: Precious metals (gold, silver, the Iron and steel scrap Copper scrap Nickel scrap Aluminium scrap Zinc scrap Tin scrap Tungsten scrap Molybdenum scrap Tantalum scrap Magnesium scrap Cobalt scrap Bismuth scrap Titanium scrap Zirconium scrap Manganese scrap Germanium scrap Vanadium scrap Scrap of hafnium, indium, niobium, rhenium and gallium Thorium scrap Rare earths scrap Chromium scrap B1020 Clean, uncontaminated metal scrap, including alloys, in bulk finished form (sheet, plate, beams, rods, etc.), of: Antimony scrap Beryllium scrap Cadmium scrap Lead scrap (but excluding lead -acid batteries) Selenium scrap Tellurium scrap B1030 Refractory metals containing residues B1031 Molybdenum, tungsten, titanium, tantalum, niobium and rhenium metal and metal alloy wastes in metallic dispersible form (metal powder), excluding such wastes as specified in list A under entry A1050, Galvanic sludges B1040 Scrap assemblies from electrical power generation not contaminated with lubricating oil, PCB or PCT to an extent to render them hazardous B1050 Mixed non -ferrous metal, heavy fraction scrap, not containing Annex I materials in concentrations sufficient to exhibit Annex Ill characteristics17 BI 060 Waste selenium and tellurium in metallic elemental form including powder B1070 Waste of copper and copper alloys in dispersible form, unless they contain Annex I constituents to an extent that they exhibit Annex Ill characteristics B1080 Zinc ash and residues including zinc alloys residues in dispersible form unless containing Annex I constituents in concentration such as to exhibit Annex Ill characteristics18 B1090 Waste batteries conforming to a specification, excluding those made with lead, cadmium or mercury B1100 Metal- bearing wastes arising from melting, smelting and refining of metals: Hard zinc spelter Zinc -containing drosses: This gazette is also available free online at www.gpwonline.co.za 22 No. 42175 GOVERNMENT GAZETTE, 21 JANUARY 2019 Lanthanum Praseodymium Samarium Gadolinium Dysprosium Erbium Ytterbium Cerium Neodymium Europium Terbium Holmium Thulium Lutetium Galvanizing slab zinc top dross ( >90% Zn) Galvanizing slab zinc bottom dross ( >92% Zn) Zinc die casting dross ( >85% Zn) Hot dip galvanizers slab zinc dross (batch)( >92% Zn) Zinc skimmings Aluminium skimmings (or skims) excluding salt slag Slags from copper processing for further processing or refining not containing arsenic, lead or cadmium to an extent that they exhibit Annex Ill hazard characteristics Wastes of refractory linings, including crucibles, originating from copper smelting Slags from precious metals processing for further refining Tantalum- bearing tin slags with less than 0.5% tin B1110 Electrical and electronic assemblies: Electronic assemblies consisting only of metals or alloys Waste electrical and electronic assemblies or scrapl9 (including printed circuit boards) not containing components such as accumulators and other batteries included on list A, mercury- switches, glass from cathode -ray tubes and other activated glass and PCB- capacitors, or not contaminated with Annex I constituents (e.g., cadmium, mercury, lead, polychlorinated biphenyl) or from which these have been removed, to an extent that they do not possess any of the characteristics contained in note the related entry on list A A1180 Electrical and electronic assemblies (including printed circuit boards, electronic components and wires) destined for direct reuse,20 and not for recycling or final disposal21 B1115 Waste metal cables coated or insulated with plastics, not included in fist A A1190, excluding those destined for Annex IVA operations or any other disposal operations involving, at any stage, uncontrolled thermal processes, such as open -burning. B1120 Spent catalysts excluding liquids used as catalysts, containing any of: Transition metals, excluding waste catalysts (spent catalysts, liquid used catalysts or other catalysts) on list A: Scandium Vanadium Manganese Cobalt Copper Yttrium Niobium Hafnium Tungsten Titanium Chromium Iron Nickel Zinc Zirconium Molybdenum Tantalum Rhenium Lanthanides (rare earth metals): B1130 B1140 Cleaned spent precious -metal -bearing catalysts Precious -metal -bearing residues in solid form which contain traces of inorganic cyanides B1150 B1160 Precious metals and alloy wastes (gold, silver, the platinum group, but not mercury) in a dispersible, non- liquid form with appropriate packaging and labelling Precious -metal ash from the incineration of printed circuit boards (note the related entry on list A A1150) B1170 Precious -metal ash from the incineration of photographic film B1180 Waste photographic film containing silver halides and metallic silver This gazette is also available free online at www.gpwonline.co.za STAATSKOERANT, 21 JANUARIE 2019 No. 42175 23 Descriptior 17Note that even where low level contamination with Annex I materials initially exists, subsequent processes, including recycling processes, may result in separated fractions containing significantly enhanced concentrations of those Annex I materials. 18The status of zinc ash is currently under review and there is a recommendation with the United Nations Conference on Trade and Development (UNCTAD) that zinc ashes should not be dangerous goods. "This entry does not include scrap from electrical power generation. 20Reuse can include repair, refurbishment or upgrading, but not major reassembly. 211n some countries these materials destined for direct re-use are not considered wastes. List B: B2 WASTES CONTAINING PRINCIPALLY INORGANIC CONSTITUENTS, WHICH MAY CONTAIN METALS AND ORGANIC MATERIALS l B2010 Wastes from mining operations in non -dispersible form: Natural graphite waste Slate waste, whether or not roughly trimmed or merely cut, by sawing or otherwise Mica waste Leucite, nepheline and nepheline syenite waste Feldspar waste Fluorspar waste Silica wastes in solid form excluding those used in foundry operation B2020 Glass waste in non -dispersible form: Cullet and other waste and scrap of glass except for glass from cathode -ray tubes and other activated glasses B2030 Ceramic wastes in non -dispersible form: Cermet wastes and scrap (metal ceramic composites Ceramic based fibres not elsewhere specified or included B2040 Other wastes containing principally inorganic constituents: Partially refined calcium sulphate produced from flue -gas desulphurization (FGD) Waste gypsum wallboard or plasterboard arising from the demolition of buildings Slag from copper production, chemically stabilized, having a high iron content (above 20 %) and processed according to industrial specifications (e.g., DIN 4301 and DIN 8201) mainly for construction and abrasive applications Sulphur in solid form Limestone from the production of calcium cyanamide (having a pH less than 9) Sodium, potassium, calcium chlorides Carborundum (silicon carbide) Broken concrete Lithium- tantalum and lithium -niobium containing glass scraps B2050 Coal -fired power plant fly -ash, not included on list A (note the related entry on list A A2060) B2060 Spent activated carbon not containing any Annex I constituents to the extent they exhibit Annex III characteristics, for example, carbon resulting from the treatment of potable water and processes of the food industry and vitamin production (note the related entry on list A A4160) B2070 Calcium fluoride sludge B2080 Waste gypsum arising from chemical industry processes not included on list A (note the related entry on list A A2040) B1190 Waste photographic paper containing silver halides and metallic silver B1200 Granulated slag arising from the manufacture of iron and steel B1210 Slag arising from the manufacture of iron and steel including slags as a source of TiO2 and vanadium B1220 Slag from zinc production, chemically stabilized, having a high iron content (above 20 %) and processed according to industrial specifications (e.g., DIN 4301) mainly for construction B1230 Mill scaling arising from the manufacture of iron and steel B1240 Copper oxide mill -scale B1250 Waste end -of -life motor vehicles, containing neither liquids nor other hazardous components This gazette is also available free online at www.gpwonline.co.za 24 No. 42175 GOVERNMENT GAZETTE, 21 JANUARY 2019 B2090 Waste anode butts from steel or aluminium production made of petroleum coke or bitumen and cleaned to normal industry specifications (excluding anode butts from chlor alkali electrolyses and from metallurgical industry) B2100 Waste hydrates of aluminium and waste alumina and residues from alumina production excluding such materials used for gas cleaning, flocculation or filtration processes B2110 Bauxite residue ("red mud ") (pH moderated to less than 11.5) B2120 Waste acidic or basic solutions with a pH greater than 2 and less than 11.5, which are not corrosive or otherwise hazardous (note the related entry on list A A4090) B2130 Bituminous material (asphalt waste) from road construction and maintenance, not containing tar22 (note the related entry on list A, A3200) List B: B3 WASTES CONTAINING PRINCIPALLY ORGANIC CONSTITUENTS, WHICH MAY CONTAIN METALS AND INORGANIC MATERIALS Igiti uescnption B3010 Solid plastic waste: The following plastic or mixed plastic materials, provided they are not mixed with other wastes and are prepared to a specification: Scrap plastic of non -halogenated polymers and co- polymers, including but not limited to the following23 ethylene styrene polypropylene polyethylene terephthalate acrylonitrile butadiene polyacetals polyamides polybutylene terephthalate polycarbonates polyethers polyphenylene sulphides acrylic polymers alkanes C10 -C13 (plasticiser) polyurethane (not containing CFCs) polysiloxanes polymethyl methacrylate polyvinyl alcohol polyvinyl butyral polyvinyl acetate Cured waste resins or condensation products including the following: urea formaldehyde resins phenol formaldehyde resins melamine formaldehyde resins epoxy resins alkyd resins polyamides The following fluorinated polymer wastes24 perfluoroethylene /propylene (FEP) perfluoro alkoxyl alkane tetrafluoroethylene /per fluoro vinyl ether (PFA) tetrafluoroethylene /per fluoro methylvinyl ether (MFA) polyvinylfluoride (PVF) polyvinylidenefluoride (PVDF) B3020 Paper, paperboard and paper product wastes The following materials, provided they are not mixed with hazardous wastes: Waste and scrap of paper or paperboard of: unbleached paper or paperboard or of corrugated paper or paperboard This gazette is also available free online at www.gpwonline.co.za STAATSKOERANT, 21 JANUARIE 2019 No. 42175 25 other paper or paperboard, made mainly of bleached chemical pulp, not coloured in the mass paper or paperboard made mainly of mechanical pulp (for example, newspapers, journals and similar printed matter) other, including but not limited to 1) laminated paperboard 2) unsorted scrap B3026 The following waste from the pre -treatment of composite packaging for liquids, not containing Annex I materials in concentrations sufficient to exhibit Annex Ill characteristics: Non -separable plastic fraction Non -separable plastic-aluminium fraction B3027 Self -adhesive label laminate waste containing raw materials used in label material production B3030 Textile wastes Silk waste (including cocoons unsuitable for reeling, yarn waste and garnetted stock) not carded or combed other Waste of wool or of fine or coarse animal hair, including yarn waste but excluding gametted stock noils of wool or of fine animal hair other waste of wool or of fine animal hair waste of coarse animal hair Cotton waste (including yarn waste and gametted stock) yam waste (including thread waste) gametted stock other Flax tow and waste Tow and waste (including yam waste and gametted stock) of true hemp (Cannabis sativa L.) Tow and waste (including yam waste and gametted stock) of jute and other textile bast fibres (excluding flax, true hemp and ramie) Tow and waste (including yarn waste and garnetted stock) of sisal and other textile fibres of the genus Agave Tow, noils and waste (including yarn waste and garnetted stock) of coconut Tow, noils and waste (including yarn waste and gametted stock) of abaca (Manila hemp or Musa textilis Nee) Tow, noils and waste (including yam waste and garnetted stock) of ramie and other vegetable textile fibres, not elsewhere specified or included Waste (including noils, yam waste and gametted stock) of man -made fibres of synthetic fibres of artificial fibres Wom clothing and other worn textile articles Used rags, scrap twine, cordage, rope and cables and worn out articles of twine, cordage, rope or cables of textile materials sorted other B3035 Waste textile floor coverings, carpets B3040 Rubber wastes The following materials, provided they are not mixed with other wastes: Waste and scrap of hard rubber (e.g., ebonite) Other rubber wastes (excluding such wastes specified elsewhere) B3050 Untreated cork and wood waste: Wood waste and scrap, whether or not agglomerated in logs, briquettes, pellets or similar forms Cork waste: crushed, granulated or ground cork B3060 Wastes arising from agro-food industries provided it is not infectious: Wine lees Dried and sterilized vegetable waste, residues and byproducts, whether or not in the form of pellets, of a kind used in animal feeding, not elsewhere specified or included This gazette is also available free online at www.gpwonline.co.za 26 No. 42175 GOVERNMENT GAZETTE, 21 JANUARY 2019 23 It is understood that such scraps are completely polymerized. 24 Post -consumer wastes are excluded from this entry: Wastes shall not be mixed Problems arising from open- burning practices to be considered Degras: residues resulting from the treatment of fatty substances or animal or vegetable waxes Waste of bones and horn- cores, unworked, defatted, simply prepared (but not cut to shape), treated with acid or degelatinised Fish waste Cocoa shells, husks, skins and other cocoa waste Other wastes from the agro-food industry excluding and international requirements and standards for human or animal consumption B3065 Waste edible fats and oils of animal or vegetable origin (e.g. frying oils), provided they do not exhibit hazard characteristic B3070 The following wastes: Waste of human hair Deactivated fungus mycelium from penicillin production to be used as animal feed B3080 Waste parings and scrap of rubber B3090 Paring and other wastes of leather or of composition leather not suitable for the manufacture of leather articles, excluding leather sludges, not containing hexavalent chromium compounds and biocides (note the related entry on list A A3100) B3100 Leather dust, ash, sludges or flours not containing hexavalent chromium compounds or biocides (note the related entry on list A A3090) B3110 Fellmongery wastes not containing hexavalent chromium compounds or biocides or infectious substances (note the related entry on list A A3110) B3120 Wastes consisting of food dyes B3130 Waste polymer ethers and waste non -hazardous monomer ethers incapable of forming peroxides B3140 Waste pneumatic tyres, excluding those destined for treatment or landfill disposal operations List B: B4 WASTES WHICH MAY CONTAIN EITHER INORGANIC OR ORGANIC CONSTITUENTS B4010 Wastes consisting mainly of water- based/latex paints, inks and hardened varnishes not containing organic solvents, heavy metals or biocides to an extent to render them hazardous (note the related entry on list A A4070) B4020 Wastes from production, formulation and use of resins, latex, plasticizers, glues /adhesives, not listed on list A, free of solvents and other contaminants to an extent that they do not exhibit list A A3050) B4030 Used single -use cameras, with batteries not included on list A This gazette is also available free online at www.gpwonline.co.za STAATSKOERANT, 21 JANUARIE 2019 No. 42175 27