50 CFR - § 260.1-260.104 - Inspection and Certification

95 SUBCHAPTER G—PROCESSED FISHERY PRODUCTS, PROC ESSED PRODUCTS THEREOF, AND CERTAIN OTHER PROC ESSED FOOD PRODUCTS PART 260—INSPECTION AND CERTIFICATION Subpart A—Inspection and Certification of Establishments and Fishery Products for Human Consumption Sec. 260.1 Administration of regulations. DEFINITIONS 260.6 Terms defined. 260.7 Designation of official certificates, memoranda, marks, other identifica tions, and devices for purposes of the Ag ricultural Marketing Act. INSPECTION SERVICE 260.12 Where inspection service is offered. 260.13 Who may obtain inspection service. 260.14 How to make application. 260.15 Information required in connection with application. 260.16 Filing of application. 260.17 Record of filing time. 260.18 When application may be rejected. 260.19 When application may be withdrawn. 260.20 Disposition of inspected sample. 260.21 Basis of inspection and grade or com pliance determination. 260.22 Order of inspection service. 260.23 Postponing inspection service. 260.24 Financial interest of inspector. 260.25 Forms of certificates. 260.26 Issuance of certificates. 260.27 Issuance of corrected certificates. 260.28 Issuance of an inspection report in lieu of an inspection certificate. 260.29 Disposition of inspection certificates. 260.30 Report of inspection results prior to issuance of formal report. APPEAL INSPECTION 260.36 When appeal inspection may be re quested. 260.37 Where to file for an appeal inspection and information required. 260.38 When an application for an appeal in spection may be withdrawn. 260.39 When appeal inspection may be re fused. 260.40 Who shall perform appeal inspection. 260.41 Appeal inspection certificate. LICENSING OF SAMPLERS AND INSPECTORS 260.47 Who may become licensed sampler. 260.48 Application to become a licensed sampler. 260.49 Inspectors. 260.50 Suspension or revocation of license of licensed sampler or licensed inspector. 260.51 Surrender of license. SAMPLING 260.57 How samples are drawn by inspectors or licensed samplers. 260.58 Accessibility for sampling. 260.59 How officially drawn samples are to be identified. 260.60 How samples are to be shipped. 260.61 Sampling plans and procedures for de termining lot compliance. 260.62 Issuance of certificate of sampling. 260.63 Identification of lots sampled. FEES AND CHARGES 260.69 Payment fees and charges. 260.70 Schedule of fees. 260.71 [Reserved] 260.72 Fees for inspection service performed under cooperative agreement. 260.73 Disposition of fees for inspections made under cooperative agreement. 260.74 Fee for appeal inspection. 260.76 [Reserved] 260.77 Fees for score sheets. 260.78 Fees for additional copies of inspec tion certificates. 260.79 Travel and other expenses. 260.80 Charges for inspection service on a contract basis. 260.81 Readjustment and increase in hourly rates of fees. MISCELLANEOUS 260.84 Policies and procedures. 260.86 Approved identification. 260.88 Political activity. 260.90 Compliance with other laws. 260.91 Identification. 260.93 Debarment and suspension. REQUIREMENTS FOR PLANTS OPERATING UNDER CONTINUOUS INSPECTION ON A CON TRACT BASIS 260.96 Application for fishery products in spection service on a contract basis at of ficial establishments. 260.97 Conditions for providing fishery prod ucts inspection service at official estab lishments. 260.98 Premises. 260.99 Buildings and structures. 260.100 Facilities. 260.101 Lavatory accommodations. 260.102 Equipment. 96 50 CFR Ch. II (10–1–23 Edition) § 260.1 1 All functions of the Department of Agri culture which pertain to fish, shellfish, and any products thereof, now performed under the authority of title II of the Act of August 14, 1946, popularly known as the Agricultural Marketing Act of 1946, as amended (7 U.S.C. 1621–1627) including but not limited to the development and promulgation of grade standards, the inspection and certification, and improvement of transportation facilities and rates for fish and shellfish and any prod ucts thereof, were transferred to the Depart ment of the Interior by the Director of the Budget (23 FR 2304) pursuant to section 6(a) of the Act of Aug. 8, 1956, popularly known as the Fish and Wildlife Act of 1956 (16 U.S.C. 742e). Reorganization Plan No. 4 of 1970 (84 Stat. 2090) transferred, among other things, such functions from the U.S. Department of the Interior to the U.S. Department of Com merce. 260.103 Operations and operating procedures shall be in accordance with an effective sanitation program. 260.104 Personnel. LABELING REQUIREMENTS 260.200–260.201 [Reserved] AUTHORITY: Sec. 6, 70 Stat. 1122, 16 U.S.C. 742e; secs. 203, 205, 60 Stat. 1087, 1090 as amended; 7 U.S.C. 1622, 1624; Reorganization Plan No. 4 of 1970 (84 Stat. 2090). SOURCE: 31 FR 16052, Dec. 15, 1966, unless otherwise noted. Subpart A—Inspection and Certifi cation of Establishments and Fishery Products for Human Consumption § 260.1 Administration of regulations. The Secretary of Commerce is charged with the administration of the regulations in this part except that he may delegate any or all of such func tions to any officer or employee of the National Marine Fisheries Service of the Department in his discretion. 1 [36 FR 21037, Nov. 3, 1971] DEFINITIONS § 260.6 Terms defined. Words in the regulations in this part in the singular form shall be deemed to import the plural and vice versa, as the case may demand. For the purposes of the regulations in this part, unless the context otherwise requires, the fol lowing terms shall have the following meanings: Acceptance number. ‘‘Acceptance number’’ means the number in a sam pling plan that indicates the maximum number of deviants permitted in a sam ple of a lot that meets a specific re quirement. Act. ‘‘Act’’ means the applicable pro visions of the Agricultural Marketing Act of 1946 (60 Stat. 1087 et seq., as amended; 7 U.S.C. 1621 et seq.). Applicant. ‘‘Applicant’’ means any in terested party who requests inspection service under the regulations in this part. Case. ‘‘Case’’ means the number of containers (cased or uncased) which, by the particular industry are ordinarily packed in a shipping container. Certificate of loading. ‘‘Certificate of loading’’ means a statement, either written or printed, issued pursuant to the regulations in this part, relative to check-loading of a processed product subsequent to inspection thereof. Certificate of sampling. ‘‘Certificate of sampling’’ means a statement, either written or printed issued pursuant to the regulations in this part, identifying officially drawn samples and may in clude a description of condition of con tainers and the condition under which the processed product is stored. Class. ‘‘Class’’ means a grade or rank of quality. Condition. ‘‘Condition’’ means the de gree of soundness of the product which may affect its merchantability and in cludes, but is not limited to those fac tors which are subject to change as a result of age, improper preparation and processing, improper packaging, im proper storage, or improper handling. Department. ‘‘Department’’ means the U.S. Department of Commerce. Deviant. ‘‘Deviant’’ means a sample unit affected by one or more deviations or a sample unit that varies in a spe cifically defined manner from the re quirements of a standard, specifica tion, or other inspection document. Deviation. ‘‘Deviation’’ means any specifically defined variation from a particular requirement. Director. ‘‘Director’’ means the Direc tor of the National Marine Fisheries Service. 97 Nat’l Marine Fish. Serv./NOAA, Comm. § 260.6 Establishment. ‘‘Establishment’’ means any premises, buildings, struc tures, facilities, and equipment (in cluding vehicles) used in the proc essing, handling, transporting, and storage of fish and fishery products. Inspection certificate. ‘‘Inspection cer tificate’’ means a statement, either written or printed, issued pursuant to the regulations in this part, setting forth in addition to appropriate de scriptive information relative to a processed product, and the container thereof, the quality and condition, or any part thereof, of the product and may include a description of the condi tions under which the product is stored. Inspection service. ‘‘Inspection serv ice’’ means: (1) The sampling pursuant to the reg ulations in this part; (2) The determination pursuant to the regulations in this part of: (i) Essential characteristics such as style, type, size, or identity of any processed product which differentiates between major groups of the same kind; (ii) The class, quality, and condition of any processed product, including the condition of the container thereof by the examination of appropriate sam ples; (3) The issuance of any certificate of sampling, inspection certificates, or certificates of loading of a processed product, or any report relative to any of the foregoing; or (4) Performance by an inspector of any related services such as to observe the preparation of the product from its raw state through each step in the en tire process; or observe conditions under which the product is being har vested, prepared, handled, stored, proc essed, packed, preserved, transported, or held; or observe sanitation as a pre requisite to the inspection of the proc essed product, either on a contract basis or periodic basis; or checkload the inspected processed product in con nection with the marketing of the product, or any other type of service of a consultative or advisory nature re lated herewith. Inspector. ‘‘Inspector’’ means any em ployee of the Department authorized by the Secretary or any other person licensed by the Secretary to inves tigate, sample, inspect, and certify in accordance with the regulations in this part to any interested party the class, quality and condition of processed products covered in this part and to perform related duties in connection with the inspection service. Interested party. ‘‘Interested party’’ means any person who has a financial interest in the commodity involved. Licensed sampler. ‘‘Licensed sampler’’ means any person who is authorized by the Secretary to draw samples of proc essed products for inspection service, to inspect for identification and condi tion of containers in a lot, and may, when authorized by the Secretary, per form related services under the act and the regulations in this part. Lot. ‘‘Lot’’ has the following mean ings: (1) For the purpose of charging fees and issuing certificates, ‘‘Lot’’ means any number of containers of the same size and type which contain a processed product of the same type and style lo cated in the same or adjacent ware houses and which are available for in spection at any one time: Provided, That: (i) Processed products in separate piles which differ from each other as to grade or other factors may be deemed to be separate lots; (ii) Containers in a pile bearing an identification mark different from other containers of such processed product in that pile, if determined to be of lower grade or deficient in other factors, may be deemed to be a sepa rate lot; and (iii) If the applicant requests more than one inspection certificate cov ering different portions of such proc essed product, the quantity of the prod uct covered by each certificate shall be deemed to be a separate lot. (2) For the purpose of sampling and determining the grade or compliance with a specification, ‘‘Lot’’ means each pile of containers of the same size and type containing a processed product of the same type and style which is sepa rated from other piles in the same warehouse, but containers in the same pile bearing an identification mark dif ferent from other containers in that 98 50 CFR Ch. II (10–1–23 Edition) § 260.7 pile may be deemed to be a separate lot. Official establishment. ‘‘Official estab lishment’’ means any establishment which has been approved by National Marine Fisheries Service, and utilizes inspection service on a contract basis. Officially drawn sample. ‘‘Officiallydrawn sample’’ means any sample that has been selected from a particular lot by an inspector, licensed sampler, or by any other person au thorized by the Secretary pursuant to the regulations in this part. Person. ‘‘Person’’ means any indi vidual, partnership, association, busi ness trust, corporation, any organized group of persons (whether incorporated or not), the United States (including, but not limited to, any corporate agen cies thereof), any State, county, or mu nicipal government, any common car rier, and any authorized agent of any of the foregoing. Plant. ‘‘Plant’’ means the premises, buildings, structures, and equipment (including, but not being limited to, machines, utensils, and fixtures) em ployed or used with respect to the man ufacture or production of processed products. Processed product. ‘‘Processed prod uct’’ means any fishery product or other food product covered under the regulations in this part which has been preserved by any recognized commer cial process, including, but not limited to, canning, freezing, dehydrating, dry ing, the addition of chemical sub stances, or by fermentation. Quality. ‘‘Quality’’ means the inher ent properties of any processed product which determine the relative degree of excellence of such product, and in cludes the effects of preparation and processing, and may or may not in clude the effects of packing media, or added ingredients. Rejection number. ‘‘Rejection num ber’’ means the number in a sampling plan that indicates the minimum num ber of deviants in a sample that will cause a lot to fail a specific require ment. Sample. ‘‘Sample’’ means any number of sample units to be used for inspec tion. Sample unit. ‘‘Sample unit’’ means a container and/or its entire contents, a portion of the contents of a container or other unit of commodity, or a com posite mixture of a product to be used for inspection. Sampling. ‘‘Sampling’’ means the act of selecting samples of processed prod ucts for the purpose of inspection under the regulations in this part. Secretary. ‘‘Secretary’’ means the Secretary of the Department or any other officer or employee of the De partment authorized to exercise the powers and to perform the duties of the Secretary in respect to the matters covered by the regulations in this part. Shipping container. ‘‘Shipping con tainer’’ means an individual container designed for shipping a number of packages or cans ordinarily packed in a container for shipping or designed for packing unpackaged processed prod ucts for shipping. Unofficially drawn sample. ‘‘Unoffi cially drawn sample’’ means any sam ple that has been selected by any per son other than an inspector or licensed sampler, or by any other person not au thorized by the Director pursuant to the regulations in this part. Wholesome. ‘‘Wholesome’’ means the minimum basis of acceptability for human food purposes, of any fish or fishery product as defined in section 402 of the Federal Food, Drug, and Cos metic Act, as amended. [31 FR 16052, Dec. 15, 1966, as amended at 36 FR 21037, Nov. 3, 1971] § 260.7 Designation of official certifi cates, memoranda, marks, other identifications, and devices for pur poses of the Agricultural Marketing Act. Subsection 203(h) of the Agricultural Marketing Act of 1946 provides crimi nal penalties for various specified of fenses relating to official certificates, memoranda, marks or other identifica tions and devices for making such marks or identifications, issued or au thorized under section 203 of said act, and certain misrepresentations con cerning the inspection or grading of ag ricultural products under said section. For the purposes of said subsection and the provisions in this part, the terms listed below shall have the respective meanings specified: 99 Nat’l Marine Fish. Serv./NOAA, Comm. § 260.15 Official certificate. ‘‘Official certifi cate’’ means any form of certification, either written or printed, including those defined in § 260.6, used under this part to certify with respect to the in spection, class, grade, quality, size, quantity, or condition of products (in cluding the compliance of products with applicable specifications). Official device. ‘‘Official device’’ means a stamping appliance, branding device, stencil, printed label, or any other mechanically or manually oper ated tool that is approved by the Direc tor for the purpose of applying any offi cial mark or other identification to any product or the packaging material thereof. Official identification. ‘‘Official identi fication’’ means any United States (U.S.) standard designation of class, grade, quality, size, quantity, or condi tion specified in this part or any sym bol, stamp, label, or seal indicating that the product has been graded or in spected and/or indicating the class, grade, quality, size, quantity, or condi tion of the product approved by the Di rector and authorized to be affixed to any product, or affixed to or printed on the packaging material of any product. Official mark. ‘‘Official mark’’ means the grade mark, inspection mark, com bined form of inspection and grade mark, and any other mark, or any vari ations in such marks, including those prescribed in § 260.86, approved by the Secretary and authorized to be affixed to any product, or affixed to or printed on the packaging material of any prod uct, stating that the product was grad ed or inspected or both, or indicating the appropriate U.S. Grade or condi tion of the product, or for the purpose of maintaining the identity of products graded or inspected or both under this part. Official memorandum. ‘‘Official memo randum’’ means any initial record of findings made by an authorized person in the process of grading, inspecting, or sampling pursuant to this part, any processing or plant-operation report made by an authorized person in con nection with grading, inspecting, or sampling under this part, and any re port made by an authorized person of services performed pursuant to this part. INSPECTION SERVICE § 260.12 Where inspection service is of fered. Inspection service may be furnished wherever an inspector or licensed sam pler is available and the facilities and conditions are satisfactory for the con duct of such service. § 260.13 Who may obtain inspection service. An application for inspection service may be made by any interested party, including, but not limited to, the United States and any instrumentality or agency thereof, any State, county, municipality, or common carrier, and any authorized agent in behalf of the foregoing. § 260.14 How to make application. An application for inspection service may be made to the officer of inspec tion or to any inspector, at or nearest the place where the service is desired. An up-to-date list of the Inspection Field Offices of the Department may be obtained upon request to the Director. Satisfactory proof that the applicant is an interested party shall be furnished. § 260.15 Information required in con nection with application. Application for inspection service shall be made in the English language and may be made orally (in person or by telephone), in writing, or by tele graph. If an application for inspection service is made orally, such application shall be confirmed promptly in writing. In connection with each application for inspection service, there shall be fur nished such information as may be nec essary to perform an inspection on the processed product for which applica tion for inspection is made, including but not limited to, the name of the product, name and address of the pack er or plant where such product was packed, the location of the product, its lot or car number, codes or other iden tification marks, the number of con tainers, the type and size of the con tainers, the interest of the applicant in the product, whether the lot has been inspected previously to the application by any Federal agency and the purpose for which inspection is desired. 100 50 CFR Ch. II (10–1–23 Edition) § 260.16 § 260.16 Filing of application. An application for inspection service shall be regarded as filed only when made in accordance with the regula tions in this part. § 260.17 Record of filing time. A record showing the date and hour when each application for inspection or for an appeal inspection is received shall be maintained. § 260.18 When application may be re jected. An application for inspection service may be rejected by the Secretary (a) for noncompliance by the applicant with the regulations in this part, (b) for nonpayment for previous inspection services rendered, (c) when the product is not properly identifiable by code or other marks, or (d) when it appears that to perform the inspection service would not be to the best interests of the Government. Such applicant shall be promptly notified of the reason for such rejection. § 260.19 When application may be withdrawn. An application for inspection service may be withdrawn by the applicant at any time before the inspection is per formed: Provided, That, the applicant shall pay at the hourly rate prescribed in § 260.70 for the time incurred by the inspector in connection with such ap plication, any travel expenses, tele phone, telegraph or other expenses which have been incurred by the in spection service in connection with such application. [31 FR 16052, Dec. 15, 1966, as amended at 36 FR 18738, Sept. 21, 1971] § 260.20 Disposition of inspected sam ple. Any sample of a processed product that has been used for inspection may be returned to the applicant, at his re quest and expense; otherwise it shall be destroyed, or disposed of to a chari table institution. § 260.21 Basis of inspection and grade or compliance determination. (a) Inspection service shall be per formed on the basis of the appropriate U.S. standards for grades of processed products, Federal, Military, Veterans Administration or other government agency specifications, written contract specification, or any written specifica tion or instruction which is approved by the Secretary. (b) Unless otherwise approved by the Director compliance with such grade standards, specifications, or instruc tions shall be determined by evaluating the product, or sample, in accordance with the requirements of such stand ards, specifications, or instructions: Provided, That when inspection for quality is based on any U.S. grade standard which contains a scoring sys tem the grade to be assigned to a lot is the grade indicated by the average of the total scores of the sample units: Provided further, That: (1) Such sample complies with the ap plicable standards of quality promul gated under the Federal Food, Drug, and Cosmetic Act; (2) Such sample complies with the product description; (3) Such sample meets the indicated grade with respect to factors of quality which are not rated by score points; and (4) With respect to those factors of quality which are rated by score points, each of the following require ments is met: (i) None of the sample units falls more than one grade below the indi cated grade because of any quality fac tor to which a limiting rule applies; (ii) None of the sample units falls more than 4 score points below the minimum total score for the indicated grade; and (iii) The number of sample units classed as deviants does not exceed the applicable acceptance number indi cated in the sampling plans contained in § 260.61. A ‘‘deviant,’’ as used in this paragraph, means a sample unit that falls into the next grade below the indi cated grade but does not score more than 4 points below the minimum total score for the indicated grade. (5) If any of the provisions contained in paragraphs (b)(3) and (4) of this sec tion are not met the grade is deter mined by considering such provisions in connection with succeedingly lower 101 Nat’l Marine Fish. Serv./NOAA, Comm. § 260.29 grades until the grade of the lot, if as signable, is established. § 260.22 Order of inspection service. Inspection service shall be per formed, insofar as practicable, in the order in which applications therefor are made except that precedence may be given to any such applications which are made by the United States (including, but not being limited to, any instrumentality or agency thereof) and to any application for an appeal in spection. § 260.23 Postponing inspection service. If the inspector determines that it is not possible to accurately ascertain the quality or condition of a processed product immediately after processing because the product has not reached equilibrium in color, or drained weight, or for any other substantial reason, he may postpone inspection service for such period as may be necessary. § 260.24 Financial interest of inspec tor. No inspector shall inspect any proc essed product in which he is directly or indirectly financially interested. § 260.25 Forms of certificates. Inspection certificates, certificates of sampling or loading, and other memo randa concerning inspection service shall be issued on forms approved by the Secretary. § 260.26 Issuance of certificates. (a) An inspection certificate may be issued only by an inspector: Provided, That, another employee of the inspec tion service may sign any such certifi cate covering any processed product in spected by an inspector when given power of attorney by such inspector and authorized by the Secretary, to affix the inspector’s signature to an in spection certificate which has been prepared in accordance with the facts set forth in the notes, made by the in spector, in connection with the inspec tion. (b) A certificate of loading shall be issued and signed by the inspector or licensed sampler authorized to check the loading of a specific lot of proc essed products: Provided, That, another employee of the inspection service may sign such certificate of loading cov ering any processed product checkloaded by an inspector or li censed sampler when given power of at torney by such inspector or licensed sampler and authorized by the Sec retary to affix the inspector’s or li censed sampler’s signature to a certifi cate of loading which has been pre pared in accordance with the facts set forth in the notes made by the inspec tor or licensed sampler in connection with the checkloading of a specific lot of processed products. § 260.27 Issuance of corrected certifi cates. A corrected inspection certificate may be issued by the inspector who issued the original certificate after dis tribution of a certificate if errors, such as incorrect dates, code marks, grade statements, lot or car numbers, con tainer sizes, net or drained weights, quantities, or errors in any other perti nent information require the issuance of a corrected certificate. Whenever a corrected certificate is issued, such certificate shall supersede the inspec tion certificate which was issued in error and the superseded certificate shall become null and void after the issuance of the corrected certificate. § 260.28 Issuance of an inspection re port in lieu of an inspection certifi cate. A letter report in lieu of an inspec tion certificate may be issued by an in spector when such action appears to be more suitable than an inspection cer tificate: Provided, That, the issuance of such report is approved by the Sec retary. § 260.29 Disposition of inspection cer tificates. The original of any inspection cer tificate, issued under the regulations in this part, and not to exceed four copies thereof, if requested prior to issuance, shall be delivered or mailed promptly to the applicant, or person designated by the applicant. All other copies shall 102 50 CFR Ch. II (10–1–23 Edition) § 260.30 be filed in such manner as the Sec retary may designate. Additional cop ies of any such certificates may be sup plied to any interested party as pro vided in § 260.78. § 260.30 Report of inspection results prior to issuance of formal report. Upon request of any interested party, the results of an inspection may be telegraphed or telephoned to him, or to any other person designated by him, at his expense. APPEAL INSPECTION § 260.36 When appeal inspection may be requested. An application for an appeal inspec tion may be made by any interested party who is dissatisfied with the re sults of an inspection as stated in an inspection certificate, if the lot of processed products can be positively identified by the inspection service as the lot from which officially drawn samples were previously inspected. Such application shall be made within thirty (30) days following the day on which the previous inspection was per formed, except upon approval by the Secretary the time within which an ap plication for appeal inspection may be made, may be extended. § 260.37 Where to file for an appeal in spection and information required. (a) Application for an appeal inspec tion may be filed with: (1) The inspector who issued the in spection certificate on which the ap peal covering the processed product is requested; or (2) The inspector in charge of the of fice of inspection at or nearest the place where the processed product is lo cated. (b) The application for appeal inspec tion shall state the location of the lot of processed products and the reasons for the appeal; and date and serial number of the certificate covering in spection of the processed product on which the appeal is requested, and such application may be accompanied by a copy of the previous inspection certifi cate and any other information that may facilitate inspection. Such appli cation may be made orally (in person or by telephone), in writing, or by tele graph. If made orally, written con firmation shall be made promptly. § 260.38 When an application for an appeal inspection may be with drawn. An application for appeal inspection may be withdrawn by the applicant at any time before the appeal inspection is performed: Provided, That the appli cant shall pay at the hourly rate pre scribed in § 260.70, for the time incurred by the inspector in connection with such application, any travel expenses, telephone, telegraph, or other expenses which have been incurred by the in spection service in connection with such application. [31 FR 16052, Dec. 15, 1966, as amended at 36 FR 18738, Sept. 21, 1971] § 260.39 When appeal inspection may be refused. An application for an appeal inspec tion may be refused if: (a) The reasons for the appeal inspec tion are frivolous or not substantial; (b) The quality or condition of the processed product has undergone a ma terial change since the inspection cov ering the processed product on which the appeal inspection is requested; (c) The lot in question is not, or can not be made accessible for the selec tion of officially drawn samples; (d) The lot relative to which appeal inspection is requested cannot be posi tively identified by the inspector as the lot from which officially drawn sam ples were previously inspected; or (e) There is noncompliance with the regulations in this part. Such applicant shall be notified promptly of the reason for such refusal. § 260.40 Who shall perform appeal in spection. An appeal inspection shall be per formed by an inspector or inspectors (other than the one from whose inspec tion the appeal is requested) authorized for this purpose by the Secretary and, whenever practical, such appeal inspec tion shall be conducted jointly by two such inspectors: Provided, That the in spector who made the inspection on which the appeal is requested may be authorized to draw the samples when 103 Nat’l Marine Fish. Serv./NOAA, Comm. § 260.49 another inspector or licensed sampler is not available in the area where the product is located. § 260.41 Appeal inspection certificate. After an appeal inspection has been completed, an appeal inspection certifi cate shall be issued showing the results of such appeal inspection; and such cer tificate shall supersede the inspection certificate previously issued for the processed product involved. Each ap peal inspection certificate shall clearly identify the number and date of the in spection certificate which it super sedes. The superseded certificate shall become null and void upon the issuance of the appeal inspection certificate and shall no longer represent the quality or condition of the processed product de scribed therein. The inspector or in spectors issuing an appeal inspection certificate shall forward notice of such issuance to such persons as he con siders necessary to prevent misuse of the superseded certificate if the origi nal and all copies of such superseded certificate have not previously been de livered to the inspector or inspectors issuing the appeal inspection certifi cate. The provisions in the regulations in this part concerning forms of certifi cates, issuance of certificates, and dis position of certificates shall apply to appeal inspection certificates, except that copies of such appeal inspection certificates shall be furnished all inter ested parties who received copies of the superseded certificate. LICENSING OF SAMPLERS AND INSPECTORS § 260.47 Who may become licensed sampler. Any person deemed to have the nec essary qualifications may be licensed as a licensed sampler to draw samples for the purpose of inspection under the regulations in this part. Such a license shall bear the printed signature of the Secretary, and shall be countersigned by an authorized employee of the De partment. Licensed samplers shall have no authority to inspect processed prod ucts under the regulations in this part except as to identification and condi tion of the containers in a lot. A li censed sampler shall perform his duties pursuant to the regulations in this part as directed by the Director. § 260.48 Application to become a li censed sampler. Application to become a licensed sampler shall be made to the Secretary on forms furnished for that purpose. Each such application shall be signed by the applicant in his own hand writing, and the information contained therein shall be certified by him to be true, complete, and correct to the best of his knowledge and belief, and the ap plication shall contain or be accom panied by: (a) A statement showing his present and previous occupations, together with names of all employers for whom he has worked, with periods of service, during the 10 years previous to the date of his application; (b) A statement that, in his capacity as a licensed sampler, he will not draw samples from any lot of processed prod ucts with respect to which he or his employer is an interested party; (c) A statement that he agrees to comply with all terms and conditions of the regulations in this part relating to duties of licensed samplers; and (d) Such other information as may be requested. § 260.49 Inspectors. Inspections will ordinarily be per formed by employees under the Sec retary who are employed as Federal Government employees for that pur pose. However, any person employed under any joint Federal-State inspec tion service arrangement may be li censed, if otherwise qualified, by the Secretary to make inspections in ac cordance with this part on such proc essed products as may be specified in his license. Such license shall be issued only in a case where the Secretary is satisfied that the particular person is qualified to perform adequately the in spection service for which such person is to be licensed. Each such license shall bear the printed signature of the Secretary and shall be countersigned by an authorized employee of the De partment. An inspector shall perform his duties pursuant to the regulations in this part as directed by the Director. 104 50 CFR Ch. II (10–1–23 Edition) § 260.50 § 260.50 Suspension or revocation of li cense of licensed sampler or li censed inspector. Pending final action by the Sec retary, the Director may, whenever he deems such action necessary, suspend the license of any licensed sampler, or licensed inspector, issued pursuant to the regulations in this part, by giving notice of such suspension to the respec tive licensee, accompanied by a state ment of the reasons therefor. Within 7 days after the receipt of the aforesaid notice and statement of reasons by such licensee, he may file an appeal, in writing, with the Secretary supported by any argument or evidence that he may wish to offer as to why his license should not be suspended or revoked. After the expiration of the aforesaid 7 day period and consideration of such argument and evidence, the Secretary shall take such action as he deems ap propriate with respect to such suspen sion or revocation. § 260.51 Surrender of license. Upon termination of his services as a licensed sampler or licensed inspector, or suspension or revocation of his li cense, such licensee shall surrender his license immediately to the office of in spection serving the area in which he is located. These same provisions shall apply in a case of an expired license. SAMPLING § 260.57 How samples are drawn by in spectors or licensed samplers. An inspector or a licensed sampler shall select samples, upon request, from designated lots of processed prod ucts which are so placed as to permit thorough and proper sampling in ac cordance with the regulations in this part. Such person shall, unless other wise directed by the Secretary, select sample units of such products at ran dom, and from various locations in each lot in such manner and number, not inconsistent with the regulations in this part, as to secure a representa tive sample of the lot. Samples drawn for inspection shall be furnished by the applicant at no cost to the Depart ment. § 260.58 Accessibility for sampling. Each applicant shall cause the proc essed products for which inspection is requested to be made accessible for proper sampling. Failure to make any lot accessible for proper sampling shall be sufficient cause for postponing in spection service until such time as such lot is made accessible for proper sampling. § 260.59 How officially drawn samples are to be identified. Officially drawn samples shall be marked by the inspector or licensed sampler so such samples can be prop erly identified for inspection. § 260.60 How samples are to be shipped. Unless otherwise directed by the Sec retary, samples which are to be shipped to any office of inspection shall be for warded to the office of inspection serv ing the area in which the processed prodcuts from which the samples were drawn is located. Such samples shall be shipped in a manner to avoid, if pos sible, any material change in the qual ity or condition of the sample of the processed product. All transportation charges in connection with such ship ments of samples shall be at the ex pense of the applicant and wherever practicable, such charges shall be pre paid by him. § 260.61 Sampling plans and proce dures for determining lot compli ance. (a) Except as otherwise provided for in this section in connection with in plant inspection and unless otherwise approved by the Secretary, samples shall be selected from each lot in the exact number of sample units indicated for the lot size in the applicable single sampling plan or, at the discretion of the inspection service, any comparable multiple sampling plan: Provided, That at the discretion of the inspection serv ice the number of sample units selected may be increased to the exact number of sample units indicated for any one of the larger sample sizes provided for in the appropriate plans. (b) Under the single sampling plans with respect to any specified require ment: 105 Nat’l Marine Fish. Serv./NOAA, Comm. § 260.61 (1) If the number of deviants (as de fined in connection with the specific requirements) in the sample does not exceed the acceptance number pre scribed for the sample size the lot meets the requirement; (2) If the number of deviants (as de fined in connection with the specific requirement) in the sample exceeds the acceptance number prescribed for the sample size the lot fails the require ment. (c) Under the multiple sampling plans inspection commences with the smallest sample size indicated under the appropriate plan and with respect to any specified requirement: (1) If the number of deviants (as de fined in connection with the specific requirement) in the sample being con sidered does not exceed the acceptance number prescribed for that sample size the lot meets the requirement; (2) If the number of deviants (as de fined in connection with the specific requirement) in the sample being con sidered equals or exceeds the rejection number prescribed for that sample size the lot fails the requirement; or (3) If the number of deviants (as de fined in connection with the specific requirement) in the sample being con sidered falls between the acceptance and rejection numbers of the plan, ad ditional sample units are added to the sample so that the sample thus cumu lated equals the next larger cumulative sample size in the plan. It may then be determined that the lot meets or fails the specific requirement by considering the cumulative sample and applying the procedures outlined in paragraphs (c)(1) and (2) of this section or by con sidering successively larger samples cumulated in the same manner until the lot meets or fails the specific re quirement. (d) If in the conduct of any type of in plant inspection the sample is exam ined before the lot size is known and the number of sample units exceeds the prescribed sample size for such lot but does not equal any of the prescribed larger sample sizes the lot may be deemed to meet or fail a specific re quirement in accordance with the fol lowing procedure: (1) If the number of deviants (as de fined in connection with the specific requirement) in the nonprescribed sam ple does not exceed the acceptance number of the next smaller sample size the lot meets the requirements; (2) If the number of deviants (as de fined in connection with the specific requirement) in the nonprescribed sam ple equals the acceptance number pre scribed for the next larger sample size additional sample units shall be se lected to increase the sample to the next larger prescribed sample size; (3) If the number of deviants (as de fined in connection with the specific requirement) in the nonprescribed sam ple exceeds the acceptance number pre scribed for the next larger sample size the lot fails the requirement. (e) In the event that the lot compli ance determination provisions of a standard or specification are based on the number of specified deviations in stead of deviants the procedures set forth in this section may be applied by substituting the word ‘‘deviation’’ for the word ‘‘deviant’’ wherever it ap pears. (f) Sampling plans referred to in this section are those contained in Tables I, II, III, IV, V, and VI which follow or any other plans which are applicable. For processed products not included in these tables, the minimum sample size shall be the exact number of sample units prescribed in the table, container group, and lot size that, as determined by the inspector, most closely resem bles the product, type, container size and amount of product to be samples. 1 0 6 5 0 C FR C h . II (1 0 – 1 – 2 3 E d itio n ) § 2 6 0 .6 1 SINGLE SAMPLING PLANS AND ACCEPTANCE LEVELS TABLE I—CANNED OR SIMILARLY PROCESSED FISHERY PRODUCTS, AND PRODUCTS THEREOF CONTAINING UNITS OF SUCH SIZE AND CHARACTER AS TO BE READILY SEPARABLE Container size group Lot size (number of containers) GROUP 1 Any type of container of less volume than that of a No. 300 size can (300 × 407) ............... 3,600 or less 3,601–14,400 14,401–48,000 48,001–96,000 96,001– 156,000 156,001– 228,000 228,001–300,000 300,001–420,000 Over 420,000 GROUP 2 Any type of container of a volume equal to or exceeding that of a No. 300 size can, but not exceeding that of a No. 3 cylinder size can (404 × 700) ........ 2,400 or less 2,401–12,000 12,001–24,000 24,001–48,000 48,001–72,000 72,001–108,000 108,001–168,000 168,001–240,000 Over 240,000 GROUP 3 Any type of container of a volume exceeding that of a No. 3 cyl inder size can, but not exceeding that of a No. 12 size can (603 × 812) ............... 1,200 or less 1,201–7,200 7,201–15,000 15,001–24,000 24,001–36,000 36,001–60,000 60,001–84,000 84,001–120,000 Over 120,000 GROUP 4 Any type of container of a volume exceeding that of a No. 12 size can, but not exceed ing that of a 5-gallon container ................... 200 or less 201–800 801–1,600 1,601–2,400 2,401–3,600 3,601–8,000 8,001–16,000 16,001–28,000 Over 28,000 GROUP 5 Any type of container of a volume exceeding that of a 5-gallon container ................... 25 or less 26–80 81–200 201–400 401–800 801–1,200 1,201–2,000 2,001–3,200 Over 3,200 1 0 7 N a t’l M a rin e Fish . S e rv ./N O A A , C o m m . § 2 6 0 .6 1 Single sampling plans 1 Sample size (number of sample units) 2 .......... 3 6 13 21 29 38 48 60 72 Acceptance number ..... 0 1 2 3 4 5 6 7 1 For extension of the single sample sizes beyond 72 sample units, refer to table V of this section; for multiple sampling plans comparable to the various single sampling plans refer to table VI of this section. 2 The sample units for the various container size groups are as follows: Groups 1, 2, and 3—1 container and its entire contents. Groups 4 and 5—approximately 2 pounds of product. When determined by the inspector that a 2-pound sample unit is inadequate, a larger sample unit may be substituted. TABLE II—FROZEN OR SIMILARLY PROCESSED FISHERY PRODUCTS, AND PRODUCTS THEREOF CONTAINING UNITS OF SUCH SIZE AND CHARACTER AS TO BE READILY SEPARABLE Container size group Lot size (number of containers) GROUP 1 Any type of container of 1 pound or less net weight ....................... 2,400 or less 2,401–12,000 12,001–24,000 24,001–48,000 48,001–72,000 72,001–108,000 108,001–168,000 168,001–240,000 Over 240,000 GROUP 2 Any type of container over 1 pound but not over 4 pounds net weight ....................... 1,800 or less 1,801–8,400 8,401–18,000 18,001–36,000 36,001–60,000 60,001–96,000 96,001–132,000 132,001–168,000 Over 168,000 GROUP 3 Any type of container over 4 pounds but not over 10 pounds net weight ................. 900 or less 901–3,600 3,601–10,800 10,801–18,000 18,001–36,000 36,001–60,000 60,001–84,000 84,001–120,000 Over 120,000 GROUP 4 Any type of container over 10 pounds but not over 100 pounds net weight ................. 200 or less 201–800 801–1,600 1,601–2,400 2,401–3,600 3,601–8,000 8,001–16,000 16,001–28,000 Over 28,000 GROUP 5 Any type of container over 100 pounds net weight ....................... 25 or less 26–80 81–200 201–400 401–800 801–1,200 1,201–2,000 2,001–3,200 Over 3,200 Single sampling plans 1 Sample size (number of sample units) 2 .......... 3 6 13 21 29 38 48 60 72 1 0 8 5 0 C FR C h . II (1 0 – 1 – 2 3 E d itio n ) § 2 6 0 .6 1 TABLE II—FROZEN OR SIMILARLY PROCESSED FISHERY PRODUCTS, AND PRODUCTS THEREOF CONTAINING UNITS OF SUCH SIZE AND CHARACTER AS TO BE READILY SEPARABLE—Continued Container size group Lot size (number of containers) Acceptance number ..... 0 1 2 3 4 5 6 7 8 1 For extension of the single sample sizes beyond 72 sample units, refer to table V of this section; for multiple sampling plans comparable to the various single sampling plans refer to table VI of this section. 2 The sample units for the various container size groups are as follows: Groups 1, 2, and 3—1 container and its entire contents. Groups 4 and 5—approximately 3 pounds of product. When determined by the inspector that a 3-pound sample unit is inadequate, a larger sample unit or 1 or more containers and their entire contents may be substituted for 1 or more sample units of 3 pounds. TABLE III—CANNED, FROZEN, OR OTHERWISE PROCESSED FISHERY AND RELATED PRODUCTS, AND PRODUCTS THEREOF OF A COMMINUTED, FLUID, OR HOMOGENEOUS STATE Container size group 1 Lot size (number of containers) GROUP 1 Any type of container of 12 ounces or less ....... 5,400 or less 5,401–21,600 21,601–62,400 62,401–112,000 112,001–174,000 174,001–240,000 240,001–360,000 360,001–480,000 Over 480,000 GROUP 2 Any type of container over 12 ounces but not over 60 ounces .... 3,600 or less 3,601–14,400 14,401–48,000 48,001–96,000 96,001–156,000 156,001–228,000 228,001–300,000 300,001–420,000 Over 420,000 GROUP 3 Any type of container over 60 ounces but not over 160 ounces .. 1,800 or less 1,801–8,400 8,401–18,000 18,001–60,000 36,001–60,000 60,001–96,000 96,001–132,000 132,001–168,000 Over 168,000 GROUP 4 Any type of container over 160 ounces but not over 10 gallons or 100 pounds whichever is applicable ................ 200 or less 201–800 801–1,600 1,601–3,200 3,201–8,000 8,001–16,000 16,001–24,000 24,001–32,000 Over 32,000 GROUP 5 Any type of container over 10 gallons or 100 pounds whichever is applicable ................... 25 or less 26–80 81–200 201–400 401–800 801–1,200 1,201–2,000 2,001–3,200 Over 3,200 Single sampling plans 2 Sample size (number of sample units) 3 ............ 3 6 13 21 29 38 48 60 72 1 0 9 N a t’l M a rin e Fish . S e rv ./N O A A , C o m m . § 2 6 0 .6 1 Acceptance number ....... 0 1 2 3 4 5 6 7 8 1 Ounces pertain to either fluid ounces of volume or avoirdupois ounces of net weight whichever is applicable for the product involved. 2 For extension of the single sample sizes beyond 72 sample units, refer to table V of this section; for multiple sampling plans comparable to the various single sampling plans refer to table VI of this section. 3 The sample units for the various container size groups are as follows: Groups 1, 2, and 3—1 container and its entire contents. A smaller sample unit may be substituted in group 3 at the inspector’s discretion. Groups 4, 5, and 6—approximately 16 ounces of product. When determined by the inspector that a 16-ounce sample unit is inadequate, a larger sample unit may be substituted. TABLE IV—DEHYDRATED FISHERY AND RELATED PRODUCTS Container size group Lot size (number of containers) GROUP 1 Any type of container of 1 pound or less net weight ............... 1,800 or less 1,801–8,400 8,401–18,000 18,001–36,000 36,001–60,000 60,001–96,000 96,001–132,000 132,001–168,000 Over 168,000 GROUP 2 Any type of container over 1 pound but not over 6 pounds net weight ............... 900 or less 901–3,600 3,601–10,800 10,801–18,000 18,001–36,000 36,001–60,000 60,001–84,000 84,001–120,000 Over 120,000 GROUP 3 Any type of container over 6 pounds but not over 20 pounds net weight ............... 200 or less 201–800 801–1,600 1,601–3,200 3,201–8,000 8,001–16,000 16,001–24,000 24,001–32,000 Over 32,000 GROUP 4 Any type of container over 20 pounds but not over 100 pounds net weight .. 48 or less 49–400 401–1,200 1,201–2,000 2,001–2,800 2,801–6,000 6,001–9,600 9,601–15,000 Over 15,000 GROUP 5 Any type of container over 100 pounds net weight ............... 16 or less 17–80 81–200 201–400 401–800 801–1,200 1,201–2,000 2,001–3,200 Over 3,200 Single sampling plans 1 Sample size (number of sample units) 2 .... 3 6 13 21 29 38 48 60 72 Acceptance number ... 0 1 2 3 4 5 6 7 8 1 For extension of the single sample sizes beyond 72 sample units, refer to table V of this section; for multiple sampling plans comparable to the various single sampling plans refer to table VI of this section. 2 The sample units for the various container size groups are as follows: Group 1—1 container and its entire contents. Groups 2, 3, 4, and 5—1 container and its entire contents or a small er sample unit when determined by the inspector to be adequate. 1 1 0 5 0 C FR C h . II (1 0 – 1 – 2 3 E d itio n ) § 2 6 0 .6 1 TABLE V—SINGLE SAMPLING PLANS FOR USE IN INCREASING SAMPLE SIZE BEYOND 72 SAMPLE UNITS Sample size, n ................................. 84 96 108 120 132 144 156 168 180 192 204 216 230 244 258 272 286 300 314 328 342 356 370 384 400 Acceptance numbers, c ................... 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 MULTIPLE SAMPLING PLANS 1 TABLE VI—MULTIPLE SAMPLING PLANS COMPARABLE TO THE INDICATED SINGLE SAMPLING PLANS Indicated single sampling plan: Single sample size, n ......................... 6 13 21 29 38 48 60 72 Acceptance numbers, c ..................... 1 2 3 4 5 6 7 8 Cumulative sample sizes, nc, and accept ance numbers, c, nc c r nc c r nc c r nc c r nc c r nc c r nc c r nc c r and rejection numbers, r, for multiple sampling. 4 0 2 8 0 3 10 0 3 12 0 4 14 0 4 16 0 4 18 0 5 22 0 5 6 0 2 10 0 3 14 1 4 16 0 4 20 0 5 24 1 5 28 1 6 32 1 7 8 1 2 12 1 3 18 1 4 20 1 5 26 1 6 32 2 6 38 2 7 42 2 8 14 2 3 22 2 5 24 2 5 32 2 6 40 3 8 48 3 8 52 3 9 26 4 5 28 3 6 38 3 7 48 4 8 58 4 8 62 5 10 32 3 6 44 6 7 56 7 8 68 8 9 72 6 10 36 5 6 82 9 10 1 These multiple sampling plans may be used in lieu of the single sampling plans listed at the heading of each column. 111 Nat’l Marine Fish. Serv./NOAA, Comm. § 260.73 § 260.62 Issuance of certificate of sam pling. Each inspector and each licensed sampler shall prepare and sign a cer tificate of sampling to cover the sam ples drawn by the respective person, except that an inspector who inspects the samples which he has drawn need not prepare a certificate of sampling. One copy of each certificate of sam pling prepared shall be retained by the inspector or licensed sampler (as the case may be) and the original and all other copies thereof shall be disposed of in accordance with the instructions of the Secretary. § 260.63 Identification of lots sampled. Each lot from which officially drawn samples are selected shall be marked in such manner as may be prescribed by the Secretary, if such lots do not oth erwise possess suitable identification. FEES AND CHARGES § 260.69 Payment fees and charges. Fees and charges for any inspection service shall be paid by the interested party making the application for such service, in accordance with the applica ble provisions of the regulations in this part, and, if so required by the person in charge of the office of inspection serving the area where the services are to be performed, an advance of funds prior to rendering inspection service in an amount suitable to the Secretary, or a surety bond suitable to the Sec retary, may be required as a guarantee of payment for the services rendered. All fees and charges for any inspection service, performed pursuant to the reg ulations in this part shall be paid by check, draft, or money order made pay able to the National Marine Fisheries Service. Such check, draft, or money order shall be remitted to the appro priate regional or area office serving the geographical area in which the services are performed, within ten (10) days from the date of billing, unless otherwise specified in a contract be tween the applicant and the Secretary, in which latter event the contract pro visions shall apply. [36 FR 21038, Nov. 3, 1971] § 260.70 Schedule of fees. (a) Unless otherwise provided in a written agreement between the appli cant and the Secretary, the fees to be charged and collected for any inspec tion service performed under the regu lations in this part at the request of the United States, or any other agency or instrumentality thereof, will be pub lished as a notice in the FEDERAL REG ISTER and will be in accordance with § 260.81. (b) Fees are reviewed annually to as certain that the hourly fees charged are adequate to recover the costs of the services rendered. (1) The TYPE I (Contract Inspection) hourly fee is determined by dividing the estimated annual costs by the esti mated annual billable hours. (2) The TYPE II (Lot Inspection) hourly fee is determined by adding a factor of 50 percent to the TYPE I fee, to cover additional costs (down-time, etc.) associated with conducting lot in spection services. (3) The TYPE III (Miscellaneous and Consulting) hourly fee is determined by adding a factor of 25 percent to the TYPE I fee, to cover the additional costs (down-time, etc.) associated with conducting miscellaneous inspection services. [48 FR 24901, June 3, 1983] § 260.71 [Reserved] § 260.72 Fees for inspection service performed under cooperative agree ment. The fees to be charged and collected for any inspection or similar service performed under cooperative agree ment shall be those provided for by such agreement. § 260.73 Disposition of fees for inspec tions made under cooperative agreement. Fees for inspection under a coopera tive agreement with any State or per son shall be disposed of in accordance with the terms of such agreement. Such portion of the fees collected under a cooperative agreement as may be due the United States shall be re mitted in accordance with § 260.69. 112 50 CFR Ch. II (10–1–23 Edition) § 260.74 § 260.74 Fee for appeal inspection. The fee to be charged for an appeal inspection shall be at the rates pre scribed in this part for other inspection services: Provided, That, if the result of any appeal inspection made for any ap plicant, other than the United States or any agency or instrumentality thereof, discloses that a material error was made in the inspection on which the appeal is made, no inspection fee shall be assessed. § 260.76 [Reserved] § 260.77 Fees for score sheets. If the applicant for inspection service requests score sheets showing in detail the inspection of each container or sample inspected and listed thereon, such score sheets may be furnished by the inspector in charge of the office of inspection serving the area where the inspection was performed; and such ap plicant shall be changed at the rate of $2.75 for each 12 sampled units, or frac tion thereof, inspected and listed on such score sheets. § 260.78 Fees for additional copies of inspection certificates. Additional copies of any inspection certificate other than those provided for in § 260.29, may be supplied to any interested party upon payment of a fee of $2.75 for each set of five (5) or fewer copies. § 260.79 Travel and other expenses. Charges may be made to cover the cost of travel and other expenses in curred in connection with the perform ance of any inspection service, includ ing appeal inspections: Provided, That, if charges for sampling or inspection are based on an hourly rate, an addi tional hourly charge may be made for travel time including time spent wait ing for transportation as well as time spent traveling, but not to exceed 8 hours of travel time for any one person for any one day: And provided further, That, if travel is by common carrier, no hourly charge may be made for travel time outside the employee’s offi cial work hours. § 260.80 Charges for inspection service on a contract basis. Irrespective of fees and charges pre scribed in the foregoing sections, the Secretary may enter into a written memorandum of understanding or con tract, whichever may be appropriate, with any administrative agency charged with the administration of a marketing order effective pursuant to the Agricultural Marketing Agreement Act of 1937, as revised (16 U.S.C. 661 et seq.) for the making of inspections pur suant to said agreement or order on such basis as will reimburse the Na tional Marine Fisheries Service of the Department for the full cost of ren dering such inspection service as may be determined by the Secretary. Like wise, the Secretary may enter into a written memorandum of understanding or contract, whichever may be appro priate, with an administrative agency charged with the administration of a similar program operated pursuant to the laws of any State. [36 FR 21038, Nov. 3, 1971] § 260.81 Readjustment and increase in hourly rates of fees. (a) When Federal Pay Act increases occur, the hourly rates for inspection fees will automatically be increased on the effective date of the pay act by an amount equal to the increase received by the average GS grade level of fish ery product inspectors receiving such pay increases. (b) The hourly rates of fees to be charged for inspection services will be subject to review and reevaluation for possible readjustment not less than every 3 years: Provided, That, the hour ly rates of fees to be charged for in spection services will be immediately reevaluated as to need for readjust ment with each Federal Pay Act in crease. [35 FR 15925, Oct. 9, 1970] MISCELLANEOUS § 260.84 Policies and procedures. The policies and procedures per taining to any of the inspection serv ices are contained within the NMFS Fishery Products Inspection Manual. 113 Nat’l Marine Fish. Serv./NOAA, Comm. § 260.86 The policies and procedures are avail able from the Secretary to any inter ested party by writing to Document Approval and Supply Services Branch, Inspection Services Division, P.O. Drawer 1207, 3207 Frederic St., Pascagoula, MS 39568–1207. [61 FR 9369, Mar. 8, 1996] § 260.86 Approved identification. (a) Grade marks: The approved grade mark or identification may be used on containers, labels, or otherwise indi cated for any processed product that: (1) Has been packed under inspection as provided in this part to assure com pliance with the requirements for wholesomeness established for the raw product and of sanitation established for the preparation and processing op erations, and (2) has been certified by an inspector as meeting the require ments of such grade, quality or classi fication. The grade marks approved for use shall be similar in form and design to the ex amples of Figures 1 to 5 of this section. Shield using red, white, and blue back ground or other colors appropriate for label. FIGURE 1 Shield with plain background. FIGURE 2 FIGURE 3 FIGURE 4 FIGURE 5 (b) Inspection marks: The approved in spection marks may be used on con tainers, labels, or otherwise indicated for any processed product that: (1) Has been packed under inspection as provided in this part to assure com pliance with the requirements for wholesomeness established for the raw product and of sanitation established for the preparation and processing op erations, and (2) has been certified by 114 50 CFR Ch. II (10–1–23 Edition) § 260.86 an inspector as meeting the require ments of such quality or grade classi fication as may be approved by the Secretary. The inspection marks approved for use shall be similar in form and design to the examples in Figures 6, 7, and 8 of this section. Statement enclosed within a circle. FIGURE 6 Statement without the use of the circle. FIGURE 7 Statement without the use of the circle. FIGURE 8 (c) Combined grade and inspection marks: The grade marks set forth in paragraph (a) of this section, and the inspection marks, Figures 7 and 8, set forth in paragraph (b) of this section, may be combined into a consolidated grade and inspection mark for use on processed products that have been packed under inspection as provided in this part. (d) Products not eligible for approved identification: Processed products which have not been packed under inspection as provided in this part shall not be identified by approved grade or inspec tion marks, but such products may be inspected on a lot inspection basis as provided in this part and identified by an authorized representative of the De partment by stamping the shipping cases and inspection certificate(s) cov ering such lot(s) as appropriate, with marks similar in form and design to the examples in Figures 9 and 10 of this section. FIGURE 9 115 Nat’l Marine Fish. Serv./NOAA, Comm. § 260.93 FIGURE 10 (e) Removal of labels bearing inspection marks: At the time a lot of fishery products is found to be mislabeled and the labels on the packages are not re moved within ten (10) consecutive cal endar days, the following procedure shall be applicable: (1) The processor, under the super vision of the inspector, shall clearly and conspicuously mark all master cases in the lot by means of a ‘‘rejected by USDC Inspector’’ stamp provided by the Department. (2) The processor shall be held ac countable to the Department for all mislabeled products until the products are properly labeled. (3) Clearance for the release of the re labeled products shall be obtained by the processor from the inspector. (f) Users of inspection services having an inventory of labels which bear offi cial approved identification marks stating ‘‘U.S. Department of the Inte rior’’ or otherwise referencing the Inte rior Department, will be permitted to use such marks until December 31, 1971, except that upon written request the Director, National Marine Fisheries Service, may extend such period for the use of specific labels. [36 FR 4609, Mar. 10, 1971] § 260.88 Political activity. All inspectors and licensed samplers are forbidden, during the period of their respective appointments or li censes, to take an active part in polit ical management or in political cam paigns. Political activities in city, county, State, or national elections, whether primary or regular, or in be half of any party or candidate, or any measure to be voted upon, are prohib ited. This applies to all appointees or licensees, including, but not limited to, temporary and cooperative employees and employees on leave of absence with or without pay. Willful violation of this section will constitute grounds for dismissal in the case of appointees and revocation of licenses in the case of li censees. § 260.90 Compliance with other laws. None of the requirements in the regu lations in this part shall excuse failure to comply with any Federal, State, county, or municipal laws applicable to the operation of food processing estab lishments and to processed food prod ucts. § 260.91 Identification. Each inspector and licensed sampler shall have in his possession at all times and present upon request, while on duty, the means of identification fur nished by the Department to such per son. § 260.93 Debarment and suspension. (a) Debarment. Any person may be debarred from using or benefiting from the inspection service provided under the regulations of this subchapter or under the terms of any inspection con tract, and such debarment may apply to one or more plants under his con trol, if such person engages in one or more of the following acts or activi ties: (1) Misrepresenting, misstating, or withholding any material or relevant facts or information in conjunction with any application or request for an inspection contract, inspection service, inspection appeal, lot inspection, or other service provided for under the regulations of this subchapter. (2) Using on a processed product any label which displays any official identi fication, official device, or official mark, when the label is not currently approved for use by the Director or his delegate. 116 50 CFR Ch. II (10–1–23 Edition) § 260.93 (3) Using on a processed product any label which displays the words ‘‘Packed Under Federal Inspection, U.S. Depart ment of Commerce’’, or which displays any official mark, official device, or of ficial identification, or which displays a facsimile of the foregoing, when such product has not been inspected under the regulations of this subchapter. (4) Making any statement or ref erence to the U.S. Grade of any proc essed product or any inspection service provided under the regulations of this subchapter on the label or in the adver tising of any processed product, when such product has not been inspected under the regulations of this sub chapter. (5) Making, using, issuing or at tempting to issue or use in conjunction with the sale, shipment, transfer or ad vertisement of a processed product any certificate of loading, certificate of sampling, inspection certificate, offi cial device, official identification, offi cial mark, official document, or score sheet which has not been issued, ap proved, or authorized for use with such product by an inspector. (6) Using any of the terms ‘‘United States’’, ‘‘Officially graded’’, ‘‘Offi cially inspected’’, ‘‘Government in spected’’, ‘‘Federally inspected’’, ‘‘Of ficially sampled’’, or words of similar import or meanings, or using any offi cial device, official identification, or official mark on the label, on the ship ping container, or in the advertising of any processed product, when such prod uct has not been inspected under the regulations of this subchapter. (7) Using, attempting to use, altering or reproducing any certificate, certifi cate form, design, insignia, mark, shield, device, or figure which simu lates in whole or in part any official mark, official device, official identi fication, certificate of loading, certifi cate of sampling, inspection certificate or other official certificate issued pur suant to the regulations of this sub chapter. (8) Assaulting, harassing, interfering, obstructing or attempting to interfere or obstruct any inspector or sampler in the performance of his duties under the regulations of this subchapter. (9) Violating any one or more of the terms of any inspection contract or the provisions of the regulations of this subchapter. (10) Engaging in acts or activities which destroy or interfere with the purposes of the inspection program or which have the effect of undermining the integrity of the inspection pro gram. (b) Temporary suspension. (1) When ever the Director has reasonable cause to believe that any person has engaged in any act or activity described in paragraph (a) of this section, and in such act or activity, in the judgment of the Director, would cause serious and irreparable injury to the inspection program and services provided under the regulations of this subchapter, the Director may, without a hearing, tem porarily suspend, either before or after the institution of a debarment hearing, the inspection service provided under the regulations of this subchapter or under any inspection contract for one or more plants under the control of such person. Notice of suspension shall be served by registered or certified mail, return receipt requested, and the notice shall specifically state those acts or activities of such person which are the bases for the suspension. The suspension shall become effective five (5) days after receipt of the notice. (2) Once a person has received a no tice of a temporary suspension, a de barment hearing will be set for 30 days after the effective date of the suspen sion. Within 60 days after the comple tion of the debarment hearing, the Hearing Examiner shall determine, based upon evidence of record, whether the temporary suspension shall be con tinued or terminated. A temporary sus pension shall be terminated by the Hearing Examiner if he determines that the acts or activities, which were the bases for the suspension, did not occur or will not cause serious and ir reparable injury to the inspection pro gram and services provided under the regulations of this subchapter. This de termination of the Hearing Examiner on the continuation or termination of the temporary suspension shall be final and there shall be no appeal of this de termination. The initial decision by the Hearing Examiner on the debar ment shall be made in accordance with 117 Nat’l Marine Fish. Serv./NOAA, Comm. § 260.93 paragraph (b)(1), Decisions, of this sec tion. (3) After a debarment hearing has been instituted against any person by a suspension, such suspension will re main in effect until a final decision is rendered on the debarment in accord ance with the regulations of this sec tion or the temporary suspension is terminated by the Hearing Examiner. (4) When a debarment hearing has been instituted against any person not under suspension, the Director may, in accordance with the regulations of this paragraph (b) temporarily suspend such person, and the suspension will remain in effect until a final decision on the debarment is rendered in accordance with the regulations of this section or the temporary suspension is termi nated by the Hearing Examiner. (c) Hearing Examiner. All hearing shall be held before a Hearing Exam iner appointed by the Secretary or the Director. (d) Hearing. If one or more of the acts or activities described in paragraph (a) of this section have occurred, the Di rector may institute a hearing to de termine the length of time during which the person shall be debarred and those plants to which the debarment shall apply. No person may be debarred unless there is a hearing, as prescribed in this section, and it has been deter mined by the Hearing Examiner, based on evidence of record, that the one or more of the activities described in paragraph (a) of this section have oc curred. Any debarment or suspension must be instituted within two (2) years of the time when such acts or activities described in paragraph (a) of this sec tion have occurred. (e) Notice of hearing. The Director shall notify such person of the debar ment hearing by registered or certified mail, return receipt requested. The no tice shall set forth the time and place of the hearing, the specific acts or ac tivities which are the basis for the de barment hearing, the time period of de barment being sought, and those plants to which the debarment shall apply. Except for the debarment hearing pro vided for in paragraph (b) of this sec tion the hearing will be set for a time not longer than 120 days after receipt of the notice of hearing. (f) Time and place of hearing. The hearing shall be held at a time and place fixed by the Director: Provided, however, The Hearing Examiner may, upon a proper showing of inconven ience, change the time and place of the hearing. Motions for change of time or place of the hearing must be mailed to or served upon the Hearing Examiner no later than 10 days before the hear ing. (g) Right to counsel. In all proceedings under this section, all persons and the Department of Commerce shall have the right to be represented by counsel, in accordance with the rules and regu lations set forth in title 43, Code of Federal Regulations, part 1. (h) Form, execution, and service of doc uments. (1) All papers to be filed under the regulations in this section shall be clear and legible; and shall be dated, signed in ink, contain the docket de scription and title of the proceeding, if any, and the address of the signatory. Five copies of all papers are required to be filed. Documents filed shall be exe cuted by: (i) The person or persons filing same, (ii) by an authorized officer thereof if it be a corporation or, (iii) by an attorney or other person having authority with respect thereto. (2) All documents, when filed, shall show that service has been made upon all parties to the proceeding. Such service shall be made by delivering one copy to each party in person or by mailing by first-class mail, properly addressed with postage prepaid. When a party has appeared by attorney or other representative, service on such attorney or other representative will be deemed service upon the party. The date of service of document shall be the day when the matter served is de posited in the U.S. mail, shown by the postmark thereon, or is delivered in person, as the case may be. (3) A person is deemed to have ap peared in a hearing by the filing with the Director a written notice of his ap pearance or his authority in writing to appear on behalf of one of the persons to the hearing. (4) The original of every document filed under this section and required to 118 50 CFR Ch. II (10–1–23 Edition) § 260.93 be served upon all parties to a pro ceeding shall be accompanied by a cer tificate of service signed by the party making service, stating that such serv ice has been made upon each party to the proceeding. Certificates of service may be in substantially the following form: I hereby certify that I have this day served the foregoing document upon all parties of record in this proceeding by: (1) Mailing postage prepaid, (2) delivering in person, a copy to each party. Dated at this day of , 19 Signature (i) Procedures and evidence. (1) All parties to a hearing shall be entitled to introduce all relevant evidence on the issues as stated in the notice for hear ing or as determined by the Hearing Examiner at the outset of or during the hearing. (2) Technical rules of evidence shall not apply to hearings conducted pursu ant to this section, but rules or prin ciples designed to assure production of the most credible evidence available and to subject testimony to test by cross-examination shall be applied where reasonably necessary. (j) Duties of Hearing Examiner. The Hearing Examiner shall have the au thority and duty to: (1) Take or cause depositions to be taken. (2) Regulate the course of the hear ings. (3) Prescribe the order in which evi dence shall be presented. (4) Dispose of procedural requests or similar matters. (5) Hear and initially rule upon all motions and petitions before him. (6) Administer oaths and affirma tions. (7) Rule upon offers of proof and re ceive competent, relevant, material, reliable, and probative evidence. (8) Control the admission of irrele vant, immaterial, incompetent, unreli able, repetitious, or cumulative evi dence. (9) Hear oral arguments if the Hear ing Examiner determined such require ment is necessary. (10) Fix the time for filing briefs, mo tions, and other documents to be filed in connection with hearings. (11) Issue the initial decision and dis pose of any other pertinent matters that normally and properly arise in the course of proceedings. (12) Do all other things necessary for an orderly and impartial hearing. (k) The record. (1) The Director will designate an official reporter for all hearings. The official transcript of tes timony taken, together with any ex hibits and briefs filed therewith, shall be filed with the Director. Transcripts of testimony will be available in any proceeding under the regulations of this section, at rates fixed by the con tract between the United States of America and the reporter. If the re porter is an employee of the Depart ment of Commerce, the rate will be fixed by the Director. (2) The transcript of testimony and exhibits, together with all briefs, pa pers, and all rulings by the Hearing Ex aminer shall constitute the record. The initial decision will be predicated on the same record, as will be final deci sion. (l) Decisions. (1) The Hearing Exam iner shall render the initial decision in all debarment proceedings before him. The same Hearing Examiner who pre sides at the hearing shall render the initial decision except when such Ex aminer becomes unavailable to the De partment of Commerce. In such case, another Hearing Examiner will be des ignated by the Secretary or Director to render the initial decision. Briefs, or other documents, to be submitted after the hearing must be received not later than twenty (20) days after the hearing, unless otherwise extended by the Hear ing Examiner upon motion by a party. The initial decision shall be made within sixty (60) days after the receipt of all briefs. If no appeals from the ini tial decision is served upon the Direc tor within ten (10) days of the date of the initial decision, it will become the final decision on the 20th day following the date of the initial decision. If an appeal is received, the appeal will be transmitted to the Secretary who will render the final decision after consid ering the record and the appeal. (2) All initial and final decisions shall include a statement of findings and conclusions, as well as the reasons or bases therefore, upon the material 119 Nat’l Marine Fish. Serv./NOAA, Comm. § 260.97 1 Compliance with the above requirements does not excuse failure to comply with all applicable sanitary rules and regulations of city, county, State, Federal, or other agen cies having jursidiction over such establish ments and operations. issues presented. A copy of each deci sion shall be served on the parties to the proceeding, and furnished to inter ested persons upon request. (3) It shall be the duty of the Hearing Examiner, and the Secretary where there is an appeal, to determine wheth er the person has engaged in one or more of the acts or activities described in paragraph (a) of this section, and, if there is a finding that the person has engaged in such acts or activities, the length of time the person shall be debarred, and the plants to which the debarment shall apply. [31 FR 16052, Dec. 15, 1966, as amended at 36 FR 18738, Sept. 21, 1971] REQUIREMENTS FOR PLANTS OPERATING UNDER CONTINUOUS INSPECTION ON A CONTRACT BASIS 1 § 260.96 Application for fishery prod ucts inspection service on a con tract basis at official establish ments. Any person desiring to process and pack products in an establishment under fishery products inspection serv ice on a contract basis, must receive approval of such buildings and facili ties as an official establishment prior to the inauguration of such service. An application for inspection service to be rendered in an establishment shall be approved according to the following procedure: (a) Initial survey: When application has been filed for inspection service as aforesaid, NMFS inspector(s) shall ex amine the buildings, premises, and fa cilities according to the requirements of the fishery products inspection serv ice and shall specify any additional fa cilities required for the service. (b) Final survey and establishment approval: Prior to the inauguration of the fishery products inspection service, a final survey of the buildings, prem ises, and facilities shall be made to verify that the buildings are con structed and facilities are in accord ance with the approved drawings and the regulations in this part. (c) Drawings and specifications of new construction or proposed alter ations of existing official establish ments shall be furnished to the Direc tor in advance of actual construction for prior approval with regard to com pliance with requirements for facili ties. [36 FR 21039, Nov. 3, 1971] § 260.97 Conditions for providing fish ery products inspection service at official establishments. (a) The determination as to the in spection effort required to adequately provide inspection service at any estab lishment will be made by NMFS. The man-hours required may vary at dif ferent official establishments due to factors such as, but not limited to, size and complexity of operations, volume and variety of products produced, and adequacy of control systems and co operation. The inspection effort re quirement may be reevaluated when the contracting party or NMFS deems there is sufficient change in produc tion, equipment and change of quality control input to warrant reevaluation. Inspectors will not be available to per form any of employee or management duties, however, they will be available for consultation purposes. NMFS re serves the right to reassign inspectors as it deems necessary. (b) NMFS shall not be held respon sible: (1) For damages occurring through any act of commission or omission on the part of its inspectors when engaged in performing services; or (2) For production errors, such as processing temperatures, length of process, or misbranding of products; or (3) For failure to supply enough in spection effort during any period of service. (c) The contracting party will: (1) Use only wholesome raw material which has been handled or stored under sanitary conditions and is suitable for processings; maintain the official es tablishment(s), designated on the con tract in such sanitary condition and to employ such methods of handling raw 120 50 CFR Ch. II (10–1–23 Edition) § 260.97 materials for processing as may be nec essary to conform to the sanitary re quirements precribed or approved by NMFS; (2) Adequately code each primary container and master case of products sold or otherwise distributed from a manufacturing, processing, packing, or repackaging activity to enable positive lot identification to facilitate, where necessary, the segregation of specific food lots that may have become con taminated or otherwise unfit for their intended use; (3) Not permit any labels on which reference is made to Federal inspec tion, to be used on any product which is not packed under fishery products inspection service nor permit any la bels on which reference is made to any U.S. Grade to be used on any product which has not been officially certified as meeting the requirements of such grade; nor supply labels bearing ref erence to Federal inspection to another establishment unless the products to which such labels are to be applied have been packed under Federal inspec tion at an official establishment; (4) Not affix any label on which ref erence is made to Federal inspection to any container of processed foods, pro duced in any designated official estab lishment, with respect to which the grade of such product is not certified because of adulteration due to the pres ence of contaminants in excess of lim its established in accordance with the regulations or guidelines issued pursu ant to the Food, Drug, and Cosmetic Act, as amended; (5) Not, with respect to any product for which U.S. Grade Standards are in effect, affix any label on which ref erence is made to Federal inspection to any container of processed food which is substandard: Provided, That such label may be affixed to any container of such substandard quality product if such label bears a statement to indi cate the substandard quality; (6) Not, with respect to any product for which U.S. Grade Standard are not in effect, affix any label on which ref erence is made to the Federal inspec tion to containers of processed foods, except with the approval of NMFS; (7) Furnish such reports of proc essing, packaging, grading, laboratory analyses, and output of products in spected, processed, and packaged at the designated official establish-ment(s) as may be requested by NMFS, subject to the approval of the Bureau of the Budg et in accordance with the Federal Re ports Act of 1942; (8) Make available for use by inspec tors, adequate office space in the des ignated official establishment(s) and furnish suitable desks, office equip ment, and files for the proper care and storage of inspection records; (9) Make laboratory facilities and necessary equipment available for the use of inspectors to inspect samples of processed foods and/or components thereof; (10) Furnish and provide laundry service, as required by NMFS, for coats, trousers, smocks, and towels used by inspectors during performance of duty in official establishment(s); (11) Furnish stenographic and clerical assistance as may be necessary in the typing of certificates and reports and the handling of official correspondence, as well as furnish the labor incident to the drawing and grading of samples and other work required to facilitate ade quate inspection procedures whenever necessary; (12) Submit to NMFS, three (3) copies of new product specifications in a man ner prescribed by NMFS, and three (3) end-product samples for evaluation and/or laboratory analysis on all prod ucts for approval, for which U.S. Grade Standards are not available, when in spection is to be applied to such prod ucts. If requested of NMFS, such new specifications and end-product samples shall be considered confidential; (13) Submit, as required by NMFS, for approval, proofs prior to printing and thereafter four (4) copies of any finished label which may or may not bear official identification marks, when such products are packed under Federal inspection on a contract basis; (14) Not make deceptive, fraudulent, or unauthorized use in advertising, or otherwise, of the fishery products in spection service, the inspection certifi cates or reports issued, or the con tainers on which official identification marks are embossed or otherwise iden tified, in connection with the sale of any processed products; 121 Nat’l Marine Fish. Serv./NOAA, Comm. § 260.98 (15) Submit to NMFS, four (4) copies of each label which may or may not bear official identification marks, when such labels are to be withdrawn from inspection or when approved la bels are disapproved for further use under inspection; (16) Notify NMFS in advance of the proposed use of any labels which re quire obliteration of any official iden tification marks, and all reference to the inspection service on approved la bels which have been withdrawn or dis approved for use; (17) Accord representatives of NMFS at all reasonable times free and imme diate access to establishment(s) and of ficial establishment(s) under appli cant’s control for the purpose of check ing codes, coded products, coding de vices, coding procedures, official iden tification marks obliteration, and use of withdrawn or disapproved labels. (d) Termination of inspection serv ices: (1) The fishery products inspection service, including the issuance of in spection reports, shall be rendered from the date of the commencement specified in the contract and continue until suspended or terminated: (i) By mutual consent; (ii) by either party giving the other party sixty (60) days’ written notice specifying the date of suspension or termination; (iii) by one (1) day’s written notice by NMFS in the event the applicant fails to honor any invoice within ten (10) days after date of receipt of such in voice covering the full costs of the in spection service provided, or in the event the applicant fails to maintain its designated plants in a sanitary con dition or to use wholesome raw mate rials for processing as required by NMFS, or in the event the applicant fails to comply with any provisions of the regulations contained in this part; (iv) by automatic termination in case of bankruptcy, closing out of business, or change in controlling ownership. (2) In case the contracting party wishes to terminate the fishery prod ucts inspection service under the terms of paragraph (d)(1)(i) or (ii) of this sec tion, either the service must be contin ued until all unused containers, labels, and advertising material on hand or in possession of his supplier bearing offi cial identification marks, or reference to fishery products inspection service have been used, or said containers, la bels, and advertising material must be destroyed, or official identification marks, and all other reference to the fishery products inspection service on said containers, labels, advertising ma terial must be obliterated, or assurance satisfactory to NMFS must be fur nished that such containers, labels, and advertising material will not be used in violation of any of the provisions of the regulations in the part. (3) In case the fishery products in spection service is terminated for cause by NMFS under the terms of paragraph (d)(1)(iii) of this section, or in case of automatic termination under terms of paragraph (d)(1)(iv) of this section, the contracting party must de stroy all unused containers, labels, and advertising material on hand bearing official identification marks, or ref erence to fishery products inspection service, or must obliterate official identification marks, and all reference to the fishery products inspection serv ice on said containers, labels and ad vertising material. After termination of the fishery prod ucts inspection service, NMFS may, at such time or times as it may determine to be necessary, during regular busi ness hours, enter the establishment(s) or other facilities in order to ascertain that the containers, labels, and adver tising material have been altered or disposed of in the manner provided herein, to the satisfaction of NMFS. [36 FR 21039, Nov. 3, 1971] § 260.98 Premises. The premises about an official estab lishment shall be free from conditions which may result in the contamination of food including, but not limited to, the following: (a) Strong offensive odors; (b) Improperly stored equipment, lit ter, waste, refuse, and uncut weeds or grass within the immediate vicinity of the buildings or structures that may constitute an attractant, breeding place, or harborage for rodents, insects, and other pests; (c) Excessively dusty roads, yards, or parking lots that may constitute a 122 50 CFR Ch. II (10–1–23 Edition) § 260.99 source of contamination in areas where food is exposed; (d) Inadequately drained areas that may contribute contamination to food products through seepage or foot-borne filth and by providing a breeding place for insects or micro-organisms; If the grounds of an official establish ment are bordered by grounds not under the official establishment opera tor’s control of the kind described in paragraphs (b) through (d) of this sec tion, care must be exercised in the offi cial establishment by inspection, ex termination, or other means to effect exclusion of pests, dirt, and other filth that may be a source of food contami nation. [36 FR 21040, Nov. 3, 1971] § 260.99 Buildings and structures. The buildings and structures shall be properly constructed and maintained in a sanitary condition, including, but not limited to the following require ments: (a) Lighting. There shall be sufficient light (1) consistent with the use to which the particular portion of the building is devoted, and (2) to provide for efficient cleaning. Belts and tables on which picking, sorting, or trimming operations are carried on shall be pro vided with sufficient nonglaring light to insure adequacy of the respective operation. Light bulbs, fixtures, sky lights, or other glass suspended over exposed food in any step of preparation shall be of the safety type or otherwise protected to prevent food contamina tion in case of breakage. (b) Ventilation. There shall be suffi cient ventilation in each room and compartment thereof to prevent exces sive condensation of moisture and to insure sanitary and suitable processing and operating conditions. If such ven tilation does not prevent excessive con densation, the Director may require that suitable facilities be provided to prevent the condensate from coming in contact with equipment used in proc essing operations and with any ingre dient used in the manufacture or pro duction of a processed product. (c) Drains and gutters. All drains and gutters shall be properly installed with approved traps and vents. The drainage and plumbing system must permit the quick runoff of all water from official establishment buildings, and surface water around buildings and on the premises; and all such water shall be disposed of in such a manner as to pre vent a nuisance or health hazard. Tanks or other equipment whose drains are connected to the waste system must have such screens and vacuum breaking devices affixed so as to pre vent the entrance of waste water, ma terial, and the entrance of vermin to the processing tanks or equipment. (d) Water supply. There shall be ample supply of both hot and cold water; and the water shall be of safe and sanitary quality with adequate facilities for its (1) distribution throughout buildings, and (2) protection against contamina tion and pollution. Sea water of safe suitable and sanitary quality may be used in the processing of various fishery products when ap proved by NMFS prior to use. (e) Construction. Roofs shall be weath ertight. The walls, ceilings, partitions, posts, doors, and other parts of all buildings and structures shall be of such materials, construction, and fin ish as to permit their efficient and thorough cleaning. The floors shall be constructed of tile, cement, or other equally impervious material, shall have good surface drainage, and shall be free from openings or rough surfaces which would interfere with maintain ing the floors in a clean condition. (f) Processing rooms. Each room and each compartment in which any proc essed products are handled, processed, or stored (1) shall be so designed and constructed as to insure processing and operating conditions of a clean and or derly character; (2) shall be free from objectional odors and vapors; and (3) shall be maintained in a clean and san itary condition. (g) Prevention of animals and insects in official establishment(s). Dogs, cats, birds, and other animals (including, but not being limited to rodents and insects) shall be excluded from the rooms from which processed products are being prepared, handled, or stored and from any rooms from which ingre dients (including, but not being limited to salt, sugar, spices, flour, batter, breading, and fishery products) are handled and stored. Screens, or other 123 Nat’l Marine Fish. Serv./NOAA, Comm. § 260.102 devices, adequate to prevent the pas sage of insects shall, where practical, be provided for all outside doors and openings. The use of chemical com pounds such as cleaning agents, insec ticides, bactericides, or rodent poisons shall not be permitted except under such precautions and restrictions as will prevent any possibility of their contamination of the processed prod uct. The use of such compounds shall be limited to those circumstances and conditions as approved by NMFS. (h) Inspector’s office. Furnished suit able and adequate office space, includ ing, but not being limited to, light, heat, and janitor service shall be pro vided rent free in official establish ments for use for official purposes by the inspector and NMFS representa tives. The room or rooms designated for this purpose shall meet with the ap proval of NMFS and shall be conven iently located, properly ventilated, and provided with lockers or cabinets suit able for the protection and storage of inspection equipment and supplies and with facilities suitable for inspectors to change clothing. (i) Adequate parking space, conven iently located, for private or official vehicles used in connection with pro viding inspection services shall be pro vided. [36 FR 21040, Nov. 3, 1971] § 260.100 Facilities. Each official establishment shall be equipped with adequate sanitary facili ties and accommodations, including, but not being limited to, the following: (a) Containers approved for use as containers for processed products shall not be used for any other purpose. (b) No product or material not in tended for human food or which creates an objectionable condition shall be processed, handled, or stored in any room, compartment, or place where any fishery product is manufactured, processed, handled, or stored. (c) Suitable facilities for cleaning and sanitizing equipment (e.g., brooms, brushes, mops, clean cloths, hose, noz zles, soaps, detergent, sprayers) shall be provided at convenient locations throughout the plant. [36 FR 21040, Nov. 3, 1971] § 260.101 Lavatory accommodations. Modern lavatory accommodations, and properly located facilities for cleaning and sanitizing utensils and hands, shall be provided. (a) Adequate lavatory and toilet ac commodations, including, but not being limited to, running hot water (135 °F. or more) and cold water, soap, and single service towels, shall be pro vided. Such accommodations shall be in or near toilet and locker rooms and also at such other places as may be es sential to the cleanliness of all per sonnel handling products. (b) Sufficient containers with covers shall be provided for used towels and other wastes. (c) An adequate number of hand washing facilities serving areas where edible products are prepared shall be operated by other than hand-operated controls, or shall be of a continuous flow type which provides an adequate flow of water for washing hands. (d) Durable signs shall be posted con spicuously in each toilet room and locker room directing employees to wash hands before returning to work. (e) Toilet facilities shall be provided according to the following formula: Number of persons Toilet bowls re quired 1 to 15, inclusive ................................................. 1 16 to 35, inclusive ............................................... 2 36 to 55, inclusive ............................................... 1 3 56 to 80, inclusive ............................................... 1 4 For each additional 30 persons in excess of 80 1 1 1 Urinals may be substituted for toilet bowls but only to the extent of one-third of the total number of bowls required. All toilet equipment shall be kept op erative, in good repair, and in a sani tary condition. [36 FR 21041, Nov. 3, 1971] § 260.102 Equipment. All equipment used for receiving, washing, segregating, picking, proc essing, packaging, or storing any proc essed products or any ingredients used in the manufacture or production thereof, shall be of such design, mate rial, and construction as will: (a) Enable the examination, segrega tion, preparation, packaging, and other processing operations applicable to 124 50 CFR Ch. II (10–1–23 Edition) § 260.103 processed products, in an efficient, clean, and sanitary manner, and (b) Permit easy access to all parts to insure thorough cleaning and effective bactericidal treatment. Insofar as is practicable, all such equipment shall be made of smooth impermeable corro sion-resistant material that will not adversely affect the processed product by chemical action or physical contact. Such equipment shall be kept in good repair and sanitary condition. Such equipment shall be cleaned and sani tized at a frequency as is necessary or required in accordance with Good Man ufacturing Practice Regulations, 21 CFR part 128. [36 FR 21041, Nov. 3, 1971] § 260.103 Operations and operating procedures shall be in accordance with an effective sanitation pro gram. (a) All operators in the receiving transporting, holdings, segregating, preparing, processing, packaging, and storing of processed products and in gredients, used as aforesaid, shall be strictly in accord with clean and sani tary methods and shall be conducted as rapidly as possible and at temperatures that will inhibit and retard the growth of bacterial and other micro-organisms and prevent any deterioration or con tamination of such processed products or ingredients thereof. Mechanical ad justments or practices which may cause contamination of foods by oil, dust, paint, scale, fumes, grinding ma terials, decomposed food, filth, chemi cals, or other foreign materials shall not be conducted during any manufac turing or processing operation. (b) All processed products, raw mate rials, ingredients, and components thereof shall be subject to inspection during each manufacturing or proc essing operation. To assure a safe, wholesome finished product, changes in processing methods and procedures as may be required by the Director shall be effectuated as soon as practicable. All processed products which are not manufactured or prepared in accord ance with the requirements contained in §§ 260.96 to 260.104 or are unwhole some or otherwise not fit for human food shall be removed and segregated prior to any further processing oper ation. (c) Official establishments operating under Federal inspection should have an effective quality control program as appropriate for the nature of the prod ucts and processing operations. (d) All ingredients used in the manu facture or processing of any processed product shall be wholesome and fit for human food. (e) The methods and procedures em ployed in the receiving, segregating, handling, transporting, and processing of ingredients in official estab lishment(s) shall be adequate to result in a satisfactory processed product. Such methods and procedures include, but are not limited to, the following re quirements: (1) Containers, utensils, pans, and buckets used for the storage or trans porting of partially processed food in gredients shall not be nested unless re washed and sanitized before each use; (2) Containers which are used for holding partially processed food ingre dients shall not be stacked in such manner as to permit contamination of the partially processed food ingredi ents; (3) Packages or containers for proc essed products shall be clean when being filled with such products; and all reasonable precautions shall be taken to avoid soiling or contaminating the surface of any package or container liner which is, or will be, in direct con tact with such products. (f) Retention tags: (1) Any equipment such as, but not limited to, conveyors, tillers, sorters, choppers, and con tainers which fail to meet appropriate and adequate sanitation requirements will be identified by the inspector in an appropriate and conspicuous manner with the word ‘‘RETAINED.’’ Fol lowing such identification, the equip ment shall not be used until the dis crepancy has been resolved, the equip ment reinspected and approved by the inspector and the ‘‘RETAINED’’ identi fication removed by the inspector. (2) Lot(s) of processed products that may be considered to be mislabeled and/or unwholesome by reason of con taminants or which may otherwise be in such condition as to require further evaluation or testing to determine that 125 Nat’l Marine Fish. Serv./NOAA, Comm. § 261.101 the product properly labeled and/or wholesome will be identified by the in spector in an appropriate and con spicuous manner with the word ‘‘RE TAINED.’’ Such lot(s) of product shall be held for reinspection or testing. Final disposition of the lot(s) shall be determined by NMFS and the removal of the ‘‘RETAINED’’ identification shall be performed by the inspector. [36 FR 21041, Nov. 3, 1971] § 260.104 Personnel. The establishment management shall be responsible for taking all pre cautions to assure the following: (a) Disease control. No person affected by disease in a communicable form, or while a carrier of such disease, or while affected with boils, sores, infected wounds, or other abnormal sources of microbiological contamination, shall work in a food plant in any capacity in which there is a reasonable possibility of food ingredients becoming contami nated by such person, or of disease being transmitted by such person to other individuals. (b) Cleanliness. All persons, while working in direct contact with food preparation, food ingredients, or sur faces coming into contact therewith shall: (1) Wear clean outer garments, main tain a high degree of personal cleanli ness, and conform to hygenic practices while on duty, to the extent necessary to prevent contamination of food prod ucts. (2) Wash and sanitize their hands thoroughly to prevent contamination by undesirable microorganisms before starting work, after each absence from the work station, and at any other time when the hands may have become soiled or contaminated. (3) Remove all insecure jewelry and, when food is being manipulated by hand, remove from hands any jewelry that cannot be adequately sanitized. (4) If gloves are used in food han dling, maintain them in an intact, clean, and sanitary condition. Such gloves shall be of an impermeable ma terial except where their usage would be inappropriate or incompatible with the work involved. (5) Wear hair nets, caps, masks, or other effective hair restraints. Other persons that may incidentally enter the processing areas shall comply with this requirement. (6) Not store clothing or other per sonal belongings, eat food, drink bev erages, chew gum, or use tobacco in any form in areas where food or food ingredients are exposed or in areas used for washing equipment or uten sils. (7) Take any other necessary pre cautions to prevent contamination of foods with microorganisms or foreign substances including, but not limited to perspiration, hair, cosmetics, to bacco, chemicals, and medicants. (c) Education and training. Personnel responsible for identifying sanitation failures or food contamination should have a background of education or ex perience, or a combination thereof, to provide a level of competency nec essary for production of clean whole some food. Food handlers and super visors should receive appropriate train ing in proper food-handling techniques and food-protection principles and should be cognizant of the danger of poor personal hygiene and unsanitary practices, and other vectors of con tamination. [36 FR 21041, Nov. 3, 1971] LABELING REQUIREMENTS §§ 260.200–260.201 [Reserved] PART 261—UNITED STATES STANDARDS FOR GRADES Sec. 261.101 Standard description. 261.102 Publication and removal of U.S. Grade Standards. 261.103 Basis for determination of a U.S. Standard for Grades. AUTHORITY: 7 U.S.C. 1621–1630. SOURCE: 61 FR 9369, Mar. 8, 1996, unless oth erwise noted. § 261.101 Standard description. A U.S. Standard for Grades author ized under this part is a standard for a fish or fishery product that has been developed and adopted by the vol untary seafood inspection program pur suant to the Agricultural Marketing Act of 1946 (7 U.S.C. 1621 et seq.) and