Product Stewardship (Oil) Amendment Regulations 2003 (No. 1) (SR No. 47 of 2003)

aus45242.doc21/12/2021 11:58 AM Product Stewardship (Oil) Amendment Regulations 2003 (No. 1)1 Statutory Rules 2003 No. 472 I, PETER JOHN HOLLINGWORTH, Governor-General of the Commonwealth of Australia, acting with the advice of the Federal Executive Council, make the following Regulations under the Product Stewardship (Oil) Act 2000. Dated 7 April 2003 PETER HOLLINGWORTH Governor-General By His Excellency’s Command DAVID KEMP Minister for the Environment and Heritage Regulation 1 2 Product Stewardship (Oil) Amendment Regulations 2003 (No. 1) 2003, 47 1 Name of Regulations These Regulations are the Product Stewardship (Oil) Amendment Regulations 2003 (No. 1). 2 Commencement These Regulations are taken to have commenced on 1 July 2002. 3 Amendment of Product Stewardship (Oil) Regulations 2000 Schedule 1 amends the Product Stewardship (Oil) Regulations 2000. Schedule 1 Amendment (regulation 3) [1] Schedule 1 substitute Schedule 1 Re-refined base oil criteria (regulation 4, table, item 1) Note The purpose of the criteria in this Schedule is to ensure that re-refined base oil, for which a product stewardship benefit is payable, is of a quality that is not damaging to the health and safety of workers and users of the oil. 1 Mutagenicity The oil must be non-carcinogenic, demonstrated by having a mutagenicity index of less than 1 using the Modified Ames Test (American Society for Testing and Materials test number E1687-98). Amendment Schedule 1 2003, 47 Product Stewardship (Oil) Amendment Regulations 2003 (No. 1) 3 2 Poly-aromatic hydrocarbons (1) The oil must contain less than the following for each kilogram of oil: (a) 10 mg of benzo(a)pyrene; (b) 10 mg of dibenz(ah)anthracene; (c) 100 mg of benz(a)anthracene; (d) 100 mg of benzo(b)fluoranthene; (e) 100 mg of benzo(k)fluoranthene; (f) 100 mg of chrysene; (g) 100 mg of indeno(123-cd)pyrene. (2) The total amount of poly-aromatic hydrocarbons mentioned in subclause (1) that the oil contains must be less than 400 mg for each kilogram of oil. (3) The total amount of all poly-aromatic hydrocarbons that the oil contains (including poly-aromatic hydrocarbons mentioned in subclause (1)) must be less than 1 000 mg for each kilogram of oil. (4) For the purpose of determining whether the criteria mentioned in subclauses (1), (2) and (3) are met, EPA test SW-846 Method 8270C must be used. 3 Polychlorinated biphenyls The oil must contain less than 2.0 mg of polychlorinated biphenyls for each kilogram of oil, determined using EPA test SW-846 Method 8082 or American Society for Testing and Materials Method D4059. 4 Polychlorinated dibenzo-p-dioxins The total amount of dioxins and furans that the oil contains must be less than 10 picograms Toxic Equivalent for each gram of oil, determined using EPA Method 1613A. Schedule 1 Amendment 4 Product Stewardship (Oil) Amendment Regulations 2003 (No. 1) 2003, 47 5 Total acid number The oil must have a total acid number of less than 0.07 mg of potassium hydroxide for each gram of oil, determined using American Society for Testing and Materials Method D974-97. 6 Heavy metals (1) The oil must contain less than the following for each kilogram of oil: (a) 5 mg of arsenic; (b) 2 mg of cadmium; (c) 10 mg of chromium; (d) 100 mg of lead. (2) For the purpose of determining whether the criteria mentioned in subclause (1) are met, American Society for Testing and Materials Method D5185 must be used. 7 Appearance The oil must have a clear and bright appearance. 8 References to tests or methods In this Schedule, a reference to a test or a method followed by a number or a letter, or both, is a reference to the test or method so numbered or lettered, or both, as in force on 1 July 2002. Notes 1. These Regulations amend Statutory Rules 2000 No. 199, as amended by 2000 No. 353. 2. Notified in the Commonwealth of Australia Gazette on 8 April 2003.